269 lines
7.2 KiB
C
269 lines
7.2 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* File Name : stm32f1xx_hal_msp.c
|
||
|
|
* Description : This file provides code for the MSP Initialization
|
||
|
|
* and de-Initialization codes.
|
||
|
|
******************************************************************************
|
||
|
|
*
|
||
|
|
* COPYRIGHT(c) 2016 STMicroelectronics
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
* are permitted provided that the following conditions are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||
|
|
* may be used to endorse or promote products derived from this software
|
||
|
|
* without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "stm32f1xx_hal.h"
|
||
|
|
|
||
|
|
extern DMA_HandleTypeDef hdma_usart3_rx;
|
||
|
|
|
||
|
|
/* USER CODE BEGIN 0 */
|
||
|
|
|
||
|
|
/* USER CODE END 0 */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* Initializes the Global MSP.
|
||
|
|
*/
|
||
|
|
void HAL_MspInit(void)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END MspInit 0 */
|
||
|
|
|
||
|
|
__HAL_RCC_AFIO_CLK_ENABLE();
|
||
|
|
|
||
|
|
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
|
||
|
|
|
||
|
|
/* System interrupt init*/
|
||
|
|
/* SysTick_IRQn interrupt configuration */
|
||
|
|
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
|
||
|
|
|
||
|
|
/* Peripheral interrupt init*/
|
||
|
|
/* PVD_IRQn interrupt configuration */
|
||
|
|
HAL_NVIC_SetPriority(PVD_IRQn, 0, 0);
|
||
|
|
HAL_NVIC_EnableIRQ(PVD_IRQn);
|
||
|
|
|
||
|
|
/**NOJTAG: JTAG-DP Disabled and SW-DP Enabled
|
||
|
|
*/
|
||
|
|
__HAL_AFIO_REMAP_SWJ_NOJTAG();
|
||
|
|
|
||
|
|
/* USER CODE BEGIN MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END MspInit 1 */
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
||
|
|
{
|
||
|
|
|
||
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
||
|
|
if(hspi->Instance==SPI1)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN SPI1_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI1_MspInit 0 */
|
||
|
|
/* Peripheral clock enable */
|
||
|
|
__SPI1_CLK_ENABLE();
|
||
|
|
|
||
|
|
/**SPI1 GPIO Configuration
|
||
|
|
PA5 ------> SPI1_SCK
|
||
|
|
PA6 ------> SPI1_MISO
|
||
|
|
PA7 ------> SPI1_MOSI
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
||
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_6;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN SPI1_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI1_MspInit 1 */
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
||
|
|
{
|
||
|
|
|
||
|
|
if(hspi->Instance==SPI1)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI1_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__SPI1_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**SPI1 GPIO Configuration
|
||
|
|
PA5 ------> SPI1_SCK
|
||
|
|
PA6 ------> SPI1_MISO
|
||
|
|
PA7 ------> SPI1_MOSI
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
|
||
|
|
|
||
|
|
}
|
||
|
|
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END SPI1_MspDeInit 1 */
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
||
|
|
{
|
||
|
|
|
||
|
|
if(htim_base->Instance==TIM6)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN TIM6_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END TIM6_MspInit 0 */
|
||
|
|
/* Peripheral clock enable */
|
||
|
|
__TIM6_CLK_ENABLE();
|
||
|
|
/* Peripheral interrupt init*/
|
||
|
|
HAL_NVIC_SetPriority(TIM6_DAC_IRQn, 0, 0);
|
||
|
|
HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
|
||
|
|
/* USER CODE BEGIN TIM6_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END TIM6_MspInit 1 */
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
||
|
|
{
|
||
|
|
|
||
|
|
if(htim_base->Instance==TIM6)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN TIM6_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END TIM6_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__TIM6_CLK_DISABLE();
|
||
|
|
|
||
|
|
/* Peripheral interrupt DeInit*/
|
||
|
|
HAL_NVIC_DisableIRQ(TIM6_DAC_IRQn);
|
||
|
|
|
||
|
|
}
|
||
|
|
/* USER CODE BEGIN TIM6_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END TIM6_MspDeInit 1 */
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
||
|
|
{
|
||
|
|
|
||
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
||
|
|
if(huart->Instance==USART3)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END USART3_MspInit 0 */
|
||
|
|
/* Peripheral clock enable */
|
||
|
|
__USART3_CLK_ENABLE();
|
||
|
|
|
||
|
|
/**USART3 GPIO Configuration
|
||
|
|
PC10 ------> USART3_TX
|
||
|
|
PC11 ------> USART3_RX
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
||
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
__HAL_AFIO_REMAP_USART3_PARTIAL();
|
||
|
|
|
||
|
|
/* Peripheral DMA init*/
|
||
|
|
|
||
|
|
hdma_usart3_rx.Instance = DMA1_Channel3;
|
||
|
|
hdma_usart3_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||
|
|
hdma_usart3_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||
|
|
hdma_usart3_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||
|
|
hdma_usart3_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||
|
|
hdma_usart3_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||
|
|
hdma_usart3_rx.Init.Mode = DMA_NORMAL;
|
||
|
|
hdma_usart3_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
|
||
|
|
HAL_DMA_Init(&hdma_usart3_rx);
|
||
|
|
|
||
|
|
__HAL_LINKDMA(huart,hdmarx,hdma_usart3_rx);
|
||
|
|
|
||
|
|
/* Peripheral interrupt init*/
|
||
|
|
HAL_NVIC_SetPriority(USART3_IRQn, 0, 0);
|
||
|
|
HAL_NVIC_EnableIRQ(USART3_IRQn);
|
||
|
|
/* USER CODE BEGIN USART3_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END USART3_MspInit 1 */
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
||
|
|
{
|
||
|
|
|
||
|
|
if(huart->Instance==USART3)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END USART3_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__USART3_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**USART3 GPIO Configuration
|
||
|
|
PC10 ------> USART3_TX
|
||
|
|
PC11 ------> USART3_RX
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11);
|
||
|
|
|
||
|
|
/* Peripheral DMA DeInit*/
|
||
|
|
HAL_DMA_DeInit(huart->hdmarx);
|
||
|
|
|
||
|
|
/* Peripheral interrupt DeInit*/
|
||
|
|
HAL_NVIC_DisableIRQ(USART3_IRQn);
|
||
|
|
|
||
|
|
}
|
||
|
|
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END USART3_MspDeInit 1 */
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
/* USER CODE BEGIN 1 */
|
||
|
|
|
||
|
|
/* USER CODE END 1 */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|