301 lines
8.0 KiB
C
301 lines
8.0 KiB
C
/**tttttttttt
|
|
******************************************************************************
|
|
* File Name : stm32f4xx_hal_msp.c
|
|
* Description : This file provides code for the MSP Initialization
|
|
* and de-Initialization codes.
|
|
******************************************************************************
|
|
*
|
|
* COPYRIGHT(c) 2016 STMicroelectronics
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal.h"
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
/**
|
|
* Initializes the Global MSP.
|
|
*/
|
|
void HAL_MspInit(void)
|
|
{
|
|
/* USER CODE BEGIN MspInit 0 */
|
|
|
|
/* USER CODE END MspInit 0 */
|
|
|
|
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
|
|
|
|
/* System interrupt init*/
|
|
/* SysTick_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
|
|
|
|
/* Peripheral interrupt init*/
|
|
/* PVD_IRQn interrupt configuration */
|
|
HAL_NVIC_SetPriority(PVD_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(PVD_IRQn);
|
|
|
|
/* USER CODE BEGIN MspInit 1 */
|
|
|
|
/* USER CODE END MspInit 1 */
|
|
}
|
|
|
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if(hspi->Instance==SPI2)
|
|
{
|
|
/* USER CODE BEGIN SPI2_MspInit 0 */
|
|
|
|
/* USER CODE END SPI2_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__SPI2_CLK_ENABLE();
|
|
|
|
/**SPI2 GPIO Configuration
|
|
PC2 ------> SPI2_MISO
|
|
PB13 ------> SPI2_SCK
|
|
PB15 ------> SPI2_MOSI
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_15;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN SPI2_MspInit 1 */
|
|
|
|
/* USER CODE END SPI2_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
|
|
{
|
|
|
|
if(hspi->Instance==SPI2)
|
|
{
|
|
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
|
|
|
/* USER CODE END SPI2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__SPI2_CLK_DISABLE();
|
|
|
|
/**SPI2 GPIO Configuration
|
|
PC2 ------> SPI2_MISO
|
|
PB13 ------> SPI2_SCK
|
|
PB15 ------> SPI2_MOSI
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2);
|
|
|
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_15);
|
|
|
|
}
|
|
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
|
|
|
/* USER CODE END SPI2_MspDeInit 1 */
|
|
|
|
}
|
|
|
|
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
|
{
|
|
|
|
if(htim_base->Instance==TIM1)
|
|
{
|
|
/* USER CODE BEGIN TIM1_MspInit 0 */
|
|
|
|
/* USER CODE END TIM1_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__TIM1_CLK_ENABLE();
|
|
/* USER CODE BEGIN TIM1_MspInit 1 */
|
|
|
|
/* USER CODE END TIM1_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
|
{
|
|
|
|
if(htim_base->Instance==TIM1)
|
|
{
|
|
/* USER CODE BEGIN TIM1_MspDeInit 0 */
|
|
|
|
/* USER CODE END TIM1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__TIM1_CLK_DISABLE();
|
|
}
|
|
/* USER CODE BEGIN TIM1_MspDeInit 1 */
|
|
|
|
/* USER CODE END TIM1_MspDeInit 1 */
|
|
|
|
}
|
|
|
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if(huart->Instance==USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspInit 0 */
|
|
|
|
/* USER CODE END USART2_MspInit 0 */
|
|
/* Peripheral clock enable */
|
|
__USART2_CLK_ENABLE();
|
|
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN USART2_MspInit 1 */
|
|
|
|
/* USER CODE END USART2_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
|
{
|
|
|
|
if(huart->Instance==USART2)
|
|
{
|
|
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
|
|
|
/* USER CODE END USART2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__USART2_CLK_DISABLE();
|
|
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
|
|
|
|
}
|
|
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
|
|
|
/* USER CODE END USART2_MspDeInit 1 */
|
|
|
|
}
|
|
|
|
void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if(hpcd->Instance==USB_OTG_FS)
|
|
{
|
|
/* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspInit 0 */
|
|
|
|
/**USB_OTG_FS GPIO Configuration
|
|
PA9 ------> USB_OTG_FS_VBUS
|
|
PA10 ------> USB_OTG_FS_ID
|
|
PA11 ------> USB_OTG_FS_DM
|
|
PA12 ------> USB_OTG_FS_DP
|
|
*/
|
|
GPIO_InitStruct.Pin = VBUS_FS_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(VBUS_FS_GPIO_Port, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = OTG_FS_ID_Pin|OTG_FS_DM_Pin|OTG_FS_DP_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* Peripheral clock enable */
|
|
__USB_OTG_FS_CLK_ENABLE();
|
|
/* Peripheral interrupt init*/
|
|
HAL_NVIC_SetPriority(OTG_FS_IRQn, 5, 0);
|
|
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
|
|
/* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspInit 1 */
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd)
|
|
{
|
|
|
|
if(hpcd->Instance==USB_OTG_FS)
|
|
{
|
|
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__USB_OTG_FS_CLK_DISABLE();
|
|
|
|
/**USB_OTG_FS GPIO Configuration
|
|
PA9 ------> USB_OTG_FS_VBUS
|
|
PA10 ------> USB_OTG_FS_ID
|
|
PA11 ------> USB_OTG_FS_DM
|
|
PA12 ------> USB_OTG_FS_DP
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, VBUS_FS_Pin|OTG_FS_ID_Pin|OTG_FS_DM_Pin|OTG_FS_DP_Pin);
|
|
|
|
/* Peripheral interrupt DeInit*/
|
|
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
|
|
|
|
}
|
|
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspDeInit 1 */
|
|
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
/* USER CODE END 1 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|