466 lines
16 KiB
C
466 lines
16 KiB
C
|
/**
|
||
|
|
******************************************************************************
|
||
|
|
* File Name : ADC.c
|
||
|
|
* Description : This file provides code for the configuration
|
||
|
|
* of the ADC instances.
|
||
|
|
******************************************************************************
|
||
|
|
* This notice applies to any and all portions of this file
|
||
|
|
* that are not between comment pairs USER CODE BEGIN and
|
||
|
|
* USER CODE END. Other portions of this file, whether
|
||
|
|
* inserted by the user or by software development tools
|
||
|
|
* are owned by their respective copyright owners.
|
||
|
|
*
|
||
|
|
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted, provided that the following conditions are met:
|
||
|
|
*
|
||
|
|
* 1. Redistribution of source code must retain the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||
|
|
* this list of conditions and the following disclaimer in the documentation
|
||
|
|
* and/or other materials provided with the distribution.
|
||
|
|
* 3. Neither the name of STMicroelectronics nor the names of other
|
||
|
|
* contributors to this software may be used to endorse or promote products
|
||
|
|
* derived from this software without specific written permission.
|
||
|
|
* 4. This software, including modifications and/or derivative works of this
|
||
|
|
* software, must execute solely and exclusively on microcontroller or
|
||
|
|
* microprocessor devices manufactured by or for STMicroelectronics.
|
||
|
|
* 5. Redistribution and use of this software other than as permitted under
|
||
|
|
* this license is void and will automatically terminate your rights under
|
||
|
|
* this license.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||
|
|
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||
|
|
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||
|
|
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||
|
|
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*
|
||
|
|
******************************************************************************
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Includes ------------------------------------------------------------------*/
|
||
|
|
#include "adc.h"
|
||
|
|
|
||
|
|
#include "gpio.h"
|
||
|
|
#include "dma.h"
|
||
|
|
|
||
|
|
/* USER CODE BEGIN 0 */
|
||
|
|
|
||
|
|
#if HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 1 \
|
||
|
|
|| HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 2
|
||
|
|
#include "prev_board_ver/adc_V3_2.c"
|
||
|
|
#elif HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 3 \
|
||
|
|
|| HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 4
|
||
|
|
#include "prev_board_ver/adc_V3_4.c"
|
||
|
|
#else
|
||
|
|
/* USER CODE END 0 */
|
||
|
|
|
||
|
|
ADC_HandleTypeDef hadc1;
|
||
|
|
ADC_HandleTypeDef hadc2;
|
||
|
|
ADC_HandleTypeDef hadc3;
|
||
|
|
DMA_HandleTypeDef hdma_adc1;
|
||
|
|
|
||
|
|
/* ADC1 init function */
|
||
|
|
void MX_ADC1_Init(void)
|
||
|
|
{
|
||
|
|
ADC_ChannelConfTypeDef sConfig;
|
||
|
|
ADC_InjectionConfTypeDef sConfigInjected;
|
||
|
|
|
||
|
|
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||
|
|
*/
|
||
|
|
hadc1.Instance = ADC1;
|
||
|
|
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||
|
|
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
||
|
|
hadc1.Init.ScanConvMode = DISABLE;
|
||
|
|
hadc1.Init.ContinuousConvMode = DISABLE;
|
||
|
|
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||
|
|
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||
|
|
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||
|
|
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||
|
|
hadc1.Init.NbrOfConversion = 1;
|
||
|
|
hadc1.Init.DMAContinuousRequests = DISABLE;
|
||
|
|
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||
|
|
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||
|
|
*/
|
||
|
|
sConfig.Channel = ADC_CHANNEL_6;
|
||
|
|
sConfig.Rank = 1;
|
||
|
|
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||
|
|
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||
|
|
*/
|
||
|
|
sConfigInjected.InjectedChannel = ADC_CHANNEL_6;
|
||
|
|
sConfigInjected.InjectedRank = 1;
|
||
|
|
sConfigInjected.InjectedNbrOfConversion = 1;
|
||
|
|
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||
|
|
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||
|
|
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||
|
|
sConfigInjected.AutoInjectedConv = DISABLE;
|
||
|
|
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||
|
|
sConfigInjected.InjectedOffset = 0;
|
||
|
|
if (HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
/* ADC2 init function */
|
||
|
|
void MX_ADC2_Init(void)
|
||
|
|
{
|
||
|
|
ADC_ChannelConfTypeDef sConfig;
|
||
|
|
ADC_InjectionConfTypeDef sConfigInjected;
|
||
|
|
|
||
|
|
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||
|
|
*/
|
||
|
|
hadc2.Instance = ADC2;
|
||
|
|
hadc2.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||
|
|
hadc2.Init.Resolution = ADC_RESOLUTION_12B;
|
||
|
|
hadc2.Init.ScanConvMode = DISABLE;
|
||
|
|
hadc2.Init.ContinuousConvMode = DISABLE;
|
||
|
|
hadc2.Init.DiscontinuousConvMode = DISABLE;
|
||
|
|
hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||
|
|
hadc2.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
|
||
|
|
hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||
|
|
hadc2.Init.NbrOfConversion = 1;
|
||
|
|
hadc2.Init.DMAContinuousRequests = DISABLE;
|
||
|
|
hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||
|
|
if (HAL_ADC_Init(&hadc2) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||
|
|
*/
|
||
|
|
sConfig.Channel = ADC_CHANNEL_13;
|
||
|
|
sConfig.Rank = 1;
|
||
|
|
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||
|
|
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||
|
|
*/
|
||
|
|
sConfigInjected.InjectedChannel = ADC_CHANNEL_10;
|
||
|
|
sConfigInjected.InjectedRank = 1;
|
||
|
|
sConfigInjected.InjectedNbrOfConversion = 1;
|
||
|
|
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||
|
|
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||
|
|
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||
|
|
sConfigInjected.AutoInjectedConv = DISABLE;
|
||
|
|
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||
|
|
sConfigInjected.InjectedOffset = 0;
|
||
|
|
if (HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
/* ADC3 init function */
|
||
|
|
void MX_ADC3_Init(void)
|
||
|
|
{
|
||
|
|
ADC_ChannelConfTypeDef sConfig;
|
||
|
|
ADC_InjectionConfTypeDef sConfigInjected;
|
||
|
|
|
||
|
|
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||
|
|
*/
|
||
|
|
hadc3.Instance = ADC3;
|
||
|
|
hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||
|
|
hadc3.Init.Resolution = ADC_RESOLUTION_12B;
|
||
|
|
hadc3.Init.ScanConvMode = DISABLE;
|
||
|
|
hadc3.Init.ContinuousConvMode = DISABLE;
|
||
|
|
hadc3.Init.DiscontinuousConvMode = DISABLE;
|
||
|
|
hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||
|
|
hadc3.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
|
||
|
|
hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||
|
|
hadc3.Init.NbrOfConversion = 1;
|
||
|
|
hadc3.Init.DMAContinuousRequests = DISABLE;
|
||
|
|
hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||
|
|
if (HAL_ADC_Init(&hadc3) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||
|
|
*/
|
||
|
|
sConfig.Channel = ADC_CHANNEL_12;
|
||
|
|
sConfig.Rank = 1;
|
||
|
|
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||
|
|
if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||
|
|
*/
|
||
|
|
sConfigInjected.InjectedChannel = ADC_CHANNEL_11;
|
||
|
|
sConfigInjected.InjectedRank = 1;
|
||
|
|
sConfigInjected.InjectedNbrOfConversion = 1;
|
||
|
|
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||
|
|
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||
|
|
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||
|
|
sConfigInjected.AutoInjectedConv = DISABLE;
|
||
|
|
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||
|
|
sConfigInjected.InjectedOffset = 0;
|
||
|
|
if (HAL_ADCEx_InjectedConfigChannel(&hadc3, &sConfigInjected) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
|
||
|
|
{
|
||
|
|
|
||
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
||
|
|
if(adcHandle->Instance==ADC1)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC1_MspInit 0 */
|
||
|
|
/* ADC1 clock enable */
|
||
|
|
__HAL_RCC_ADC1_CLK_ENABLE();
|
||
|
|
|
||
|
|
/**ADC1 GPIO Configuration
|
||
|
|
PC0 ------> ADC1_IN10
|
||
|
|
PC1 ------> ADC1_IN11
|
||
|
|
PC2 ------> ADC1_IN12
|
||
|
|
PC3 ------> ADC1_IN13
|
||
|
|
PA4 ------> ADC1_IN4
|
||
|
|
PA5 ------> ADC1_IN5
|
||
|
|
PA6 ------> ADC1_IN6
|
||
|
|
PC5 ------> ADC1_IN15
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||
|
|
|M0_TEMP_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
GPIO_InitStruct.Pin = M1_TEMP_Pin|AUX_TEMP_Pin|VBUS_S_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
/* ADC1 DMA Init */
|
||
|
|
/* ADC1 Init */
|
||
|
|
hdma_adc1.Instance = DMA2_Stream0;
|
||
|
|
hdma_adc1.Init.Channel = DMA_CHANNEL_0;
|
||
|
|
hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||
|
|
hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
|
||
|
|
hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
|
||
|
|
hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
|
||
|
|
hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
|
||
|
|
hdma_adc1.Init.Mode = DMA_CIRCULAR;
|
||
|
|
hdma_adc1.Init.Priority = DMA_PRIORITY_LOW;
|
||
|
|
hdma_adc1.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||
|
|
if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
|
||
|
|
{
|
||
|
|
_Error_Handler(__FILE__, __LINE__);
|
||
|
|
}
|
||
|
|
|
||
|
|
__HAL_LINKDMA(adcHandle,DMA_Handle,hdma_adc1);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC1_MspInit 1 */
|
||
|
|
}
|
||
|
|
else if(adcHandle->Instance==ADC2)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN ADC2_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC2_MspInit 0 */
|
||
|
|
/* ADC2 clock enable */
|
||
|
|
__HAL_RCC_ADC2_CLK_ENABLE();
|
||
|
|
|
||
|
|
/**ADC2 GPIO Configuration
|
||
|
|
PC0 ------> ADC2_IN10
|
||
|
|
PC1 ------> ADC2_IN11
|
||
|
|
PC2 ------> ADC2_IN12
|
||
|
|
PC3 ------> ADC2_IN13
|
||
|
|
PA4 ------> ADC2_IN4
|
||
|
|
PA5 ------> ADC2_IN5
|
||
|
|
PA6 ------> ADC2_IN6
|
||
|
|
PC5 ------> ADC2_IN15
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||
|
|
|M0_TEMP_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
GPIO_InitStruct.Pin = M1_TEMP_Pin|AUX_TEMP_Pin|VBUS_S_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN ADC2_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC2_MspInit 1 */
|
||
|
|
}
|
||
|
|
else if(adcHandle->Instance==ADC3)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN ADC3_MspInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC3_MspInit 0 */
|
||
|
|
/* ADC3 clock enable */
|
||
|
|
__HAL_RCC_ADC3_CLK_ENABLE();
|
||
|
|
|
||
|
|
/**ADC3 GPIO Configuration
|
||
|
|
PC0 ------> ADC3_IN10
|
||
|
|
PC1 ------> ADC3_IN11
|
||
|
|
PC2 ------> ADC3_IN12
|
||
|
|
PC3 ------> ADC3_IN13
|
||
|
|
*/
|
||
|
|
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin;
|
||
|
|
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||
|
|
|
||
|
|
/* USER CODE BEGIN ADC3_MspInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC3_MspInit 1 */
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
|
||
|
|
{
|
||
|
|
|
||
|
|
if(adcHandle->Instance==ADC1)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC1_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__HAL_RCC_ADC1_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**ADC1 GPIO Configuration
|
||
|
|
PC0 ------> ADC1_IN10
|
||
|
|
PC1 ------> ADC1_IN11
|
||
|
|
PC2 ------> ADC1_IN12
|
||
|
|
PC3 ------> ADC1_IN13
|
||
|
|
PA4 ------> ADC1_IN4
|
||
|
|
PA5 ------> ADC1_IN5
|
||
|
|
PA6 ------> ADC1_IN6
|
||
|
|
PC5 ------> ADC1_IN15
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||
|
|
|M0_TEMP_Pin);
|
||
|
|
|
||
|
|
HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_TEMP_Pin|VBUS_S_Pin);
|
||
|
|
|
||
|
|
/* ADC1 DMA DeInit */
|
||
|
|
HAL_DMA_DeInit(adcHandle->DMA_Handle);
|
||
|
|
|
||
|
|
/* ADC1 interrupt Deinit */
|
||
|
|
/* USER CODE BEGIN ADC1:ADC_IRQn disable */
|
||
|
|
/**
|
||
|
|
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||
|
|
* Be aware, disabling shared interrupt may affect other IPs
|
||
|
|
*/
|
||
|
|
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||
|
|
/* USER CODE END ADC1:ADC_IRQn disable */
|
||
|
|
|
||
|
|
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC1_MspDeInit 1 */
|
||
|
|
}
|
||
|
|
else if(adcHandle->Instance==ADC2)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN ADC2_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC2_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__HAL_RCC_ADC2_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**ADC2 GPIO Configuration
|
||
|
|
PC0 ------> ADC2_IN10
|
||
|
|
PC1 ------> ADC2_IN11
|
||
|
|
PC2 ------> ADC2_IN12
|
||
|
|
PC3 ------> ADC2_IN13
|
||
|
|
PA4 ------> ADC2_IN4
|
||
|
|
PA5 ------> ADC2_IN5
|
||
|
|
PA6 ------> ADC2_IN6
|
||
|
|
PC5 ------> ADC2_IN15
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||
|
|
|M0_TEMP_Pin);
|
||
|
|
|
||
|
|
HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_TEMP_Pin|VBUS_S_Pin);
|
||
|
|
|
||
|
|
/* ADC2 interrupt Deinit */
|
||
|
|
/* USER CODE BEGIN ADC2:ADC_IRQn disable */
|
||
|
|
/**
|
||
|
|
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||
|
|
* Be aware, disabling shared interrupt may affect other IPs
|
||
|
|
*/
|
||
|
|
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||
|
|
/* USER CODE END ADC2:ADC_IRQn disable */
|
||
|
|
|
||
|
|
/* USER CODE BEGIN ADC2_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC2_MspDeInit 1 */
|
||
|
|
}
|
||
|
|
else if(adcHandle->Instance==ADC3)
|
||
|
|
{
|
||
|
|
/* USER CODE BEGIN ADC3_MspDeInit 0 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC3_MspDeInit 0 */
|
||
|
|
/* Peripheral clock disable */
|
||
|
|
__HAL_RCC_ADC3_CLK_DISABLE();
|
||
|
|
|
||
|
|
/**ADC3 GPIO Configuration
|
||
|
|
PC0 ------> ADC3_IN10
|
||
|
|
PC1 ------> ADC3_IN11
|
||
|
|
PC2 ------> ADC3_IN12
|
||
|
|
PC3 ------> ADC3_IN13
|
||
|
|
*/
|
||
|
|
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin);
|
||
|
|
|
||
|
|
/* ADC3 interrupt Deinit */
|
||
|
|
/* USER CODE BEGIN ADC3:ADC_IRQn disable */
|
||
|
|
/**
|
||
|
|
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||
|
|
* Be aware, disabling shared interrupt may affect other IPs
|
||
|
|
*/
|
||
|
|
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||
|
|
/* USER CODE END ADC3:ADC_IRQn disable */
|
||
|
|
|
||
|
|
/* USER CODE BEGIN ADC3_MspDeInit 1 */
|
||
|
|
|
||
|
|
/* USER CODE END ADC3_MspDeInit 1 */
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
/* USER CODE BEGIN 1 */
|
||
|
|
#endif // END ADC Include
|
||
|
|
|
||
|
|
/* USER CODE END 1 */
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/**
|
||
|
|
* @}
|
||
|
|
*/
|
||
|
|
|
||
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|