*
This commit is contained in:
@@ -0,0 +1,267 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : USART.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the USART instances.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usart.h"
|
||||
|
||||
#include "gpio.h"
|
||||
#include "dma.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
UART_HandleTypeDef huart4;
|
||||
UART_HandleTypeDef huart2;
|
||||
DMA_HandleTypeDef hdma_uart4_rx;
|
||||
DMA_HandleTypeDef hdma_uart4_tx;
|
||||
DMA_HandleTypeDef hdma_usart2_rx;
|
||||
DMA_HandleTypeDef hdma_usart2_tx;
|
||||
|
||||
/* UART4 init function */
|
||||
void MX_UART4_Init(void)
|
||||
{
|
||||
|
||||
huart4.Instance = UART4;
|
||||
//huart4.Init.BaudRate = 115200; // Provisionally this can be changed to 921600 for faster transfers, the low power Arduinos will not keep up.
|
||||
huart4.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart4.Init.StopBits = UART_STOPBITS_1;
|
||||
huart4.Init.Parity = UART_PARITY_NONE;
|
||||
huart4.Init.Mode = UART_MODE_TX_RX;
|
||||
huart4.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart4.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart4) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* USART2 init function */
|
||||
|
||||
void MX_USART2_UART_Init(void)
|
||||
{
|
||||
|
||||
huart2.Instance = USART2;
|
||||
//huart2.Init.BaudRate = 115200;
|
||||
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart2.Init.StopBits = UART_STOPBITS_1;
|
||||
huart2.Init.Parity = UART_PARITY_NONE;
|
||||
huart2.Init.Mode = UART_MODE_TX_RX;
|
||||
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
if(uartHandle->Instance==UART4)
|
||||
{
|
||||
/* USER CODE BEGIN UART4_MspInit 0 */
|
||||
|
||||
/* USER CODE END UART4_MspInit 0 */
|
||||
/* UART4 clock enable */
|
||||
__HAL_RCC_UART4_CLK_ENABLE();
|
||||
|
||||
/* UART4 DMA Init */
|
||||
/* UART4_RX Init */
|
||||
hdma_uart4_rx.Instance = DMA1_Stream2;
|
||||
hdma_uart4_rx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_uart4_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_uart4_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_uart4_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_uart4_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_uart4_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_uart4_rx.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_uart4_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_uart4_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_uart4_rx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmarx,hdma_uart4_rx);
|
||||
|
||||
/* UART4_TX Init */
|
||||
hdma_uart4_tx.Instance = DMA1_Stream4;
|
||||
hdma_uart4_tx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_uart4_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_uart4_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_uart4_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_uart4_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_uart4_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_uart4_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_uart4_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_uart4_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_uart4_tx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmatx,hdma_uart4_tx);
|
||||
|
||||
/* UART4 interrupt Init */
|
||||
HAL_NVIC_SetPriority(UART4_IRQn, 10, 0);
|
||||
HAL_NVIC_EnableIRQ(UART4_IRQn);
|
||||
/* USER CODE BEGIN UART4_MspInit 1 */
|
||||
|
||||
/* USER CODE END UART4_MspInit 1 */
|
||||
}
|
||||
else if(uartHandle->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 0 */
|
||||
/* USART2 clock enable */
|
||||
__HAL_RCC_USART2_CLK_ENABLE();
|
||||
|
||||
/* USART2 DMA Init */
|
||||
/* USART2_RX Init */
|
||||
hdma_usart2_rx.Instance = DMA1_Stream5;
|
||||
hdma_usart2_rx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_usart2_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_usart2_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_usart2_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_usart2_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_usart2_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_usart2_rx.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_usart2_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_usart2_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_usart2_rx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmarx,hdma_usart2_rx);
|
||||
|
||||
/* USART2_TX Init */
|
||||
hdma_usart2_tx.Instance = DMA1_Stream6;
|
||||
hdma_usart2_tx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_usart2_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_usart2_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_usart2_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_usart2_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_usart2_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_usart2_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_usart2_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_usart2_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_usart2_tx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmatx,hdma_usart2_tx);
|
||||
|
||||
/* USART2 interrupt Init */
|
||||
HAL_NVIC_SetPriority(USART2_IRQn, 10, 0);
|
||||
HAL_NVIC_EnableIRQ(USART2_IRQn);
|
||||
/* USER CODE BEGIN USART2_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
if(uartHandle->Instance==UART4)
|
||||
{
|
||||
/* USER CODE BEGIN UART4_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END UART4_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_UART4_CLK_DISABLE();
|
||||
|
||||
/* UART4 DMA DeInit */
|
||||
HAL_DMA_DeInit(uartHandle->hdmarx);
|
||||
HAL_DMA_DeInit(uartHandle->hdmatx);
|
||||
|
||||
/* UART4 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(UART4_IRQn);
|
||||
/* USER CODE BEGIN UART4_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END UART4_MspDeInit 1 */
|
||||
}
|
||||
else if(uartHandle->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART2_CLK_DISABLE();
|
||||
|
||||
/* USART2 DMA DeInit */
|
||||
HAL_DMA_DeInit(uartHandle->hdmarx);
|
||||
HAL_DMA_DeInit(uartHandle->hdmatx);
|
||||
|
||||
/* USART2 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(USART2_IRQn);
|
||||
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user