/**
  ******************************************************************************
  * @file    main.c 
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    30-12-2011
  * @brief   Main program body
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
  ******************************************************************************  
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx.h"
#include "fsmc_nand.h"
#include "usart.h"

/** @addtogroup STM32F2xx_StdPeriph_Examples
  * @{
  */

/** @addtogroup IOToggle
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/

void GPIO_Configuration(void);
void Delay(__IO uint32_t nCount);

/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program
  * @param  None
  * @retval None
  */
int main(void)
{
  /*!< At this stage the microcontroller clock setting is already configured, 
       this is done through SystemInit() function which is called from startup
       file (startup_stm32f2xx.s) before to branch to application main.
       To reconfigure the default setting of SystemInit() function, refer to
        system_stm32f2xx.c file
     */
	
	USART_Configuration();
	USART_NVIC_Config();
	printf("\n\rWelcome to use NAND FLASH modules\r\n");
    printf("****************************************************************\r\n");

    FSMC_NAND_Test();

 	GPIO_Configuration();
	while (1)
	{
		GPIO_SetBits(GPIOD , GPIO_Pin_12);
		Delay(0x5fffff);
		GPIO_SetBits(GPIOD , GPIO_Pin_13);
		Delay(0x5fffff);
		GPIO_SetBits(GPIOD , GPIO_Pin_14);
		Delay(0x5fffff);
		GPIO_SetBits(GPIOD , GPIO_Pin_15);
		Delay(0x5fffff);


		GPIO_ResetBits(GPIOD , GPIO_Pin_12);
		Delay(0x5fffff);
		GPIO_ResetBits(GPIOD , GPIO_Pin_13);
		Delay(0x5fffff);
		GPIO_ResetBits(GPIOD , GPIO_Pin_14);
		Delay(0x5fffff);
		GPIO_ResetBits(GPIOD , GPIO_Pin_15);
		Delay(0x5fffff);
	}
}
void GPIO_Configuration(void)
{
	GPIO_InitTypeDef  GPIO_InitStructure;
    RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD, ENABLE);

	//LED1 (PC9)  LED2 (PC10)  LED3 (PC11)  LED4 (PC12)
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13| GPIO_Pin_14 | GPIO_Pin_15;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
	GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
	GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
	GPIO_Init(GPIOD, &GPIO_InitStructure);	

}
/**
  * @brief  Delay Function.
  * @param  nCount:specifies the Delay time length.
  * @retval None
  */
void Delay(__IO uint32_t nCount)
{
  while(nCount--)
  {

  }
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {

  }
}
#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/