*
This commit is contained in:
@@ -0,0 +1,465 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : ADC.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the ADC instances.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "adc.h"
|
||||
|
||||
#include "gpio.h"
|
||||
#include "dma.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
#if HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 1 \
|
||||
|| HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 2
|
||||
#include "prev_board_ver/adc_V3_2.c"
|
||||
#elif HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 3 \
|
||||
|| HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 4
|
||||
#include "prev_board_ver/adc_V3_4.c"
|
||||
#else
|
||||
/* USER CODE END 0 */
|
||||
|
||||
ADC_HandleTypeDef hadc1;
|
||||
ADC_HandleTypeDef hadc2;
|
||||
ADC_HandleTypeDef hadc3;
|
||||
DMA_HandleTypeDef hdma_adc1;
|
||||
|
||||
/* ADC1 init function */
|
||||
void MX_ADC1_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc1.Instance = ADC1;
|
||||
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc1.Init.ScanConvMode = DISABLE;
|
||||
hadc1.Init.ContinuousConvMode = DISABLE;
|
||||
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc1.Init.NbrOfConversion = 1;
|
||||
hadc1.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_6;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_6;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* ADC2 init function */
|
||||
void MX_ADC2_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc2.Instance = ADC2;
|
||||
hadc2.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc2.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc2.Init.ScanConvMode = DISABLE;
|
||||
hadc2.Init.ContinuousConvMode = DISABLE;
|
||||
hadc2.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||||
hadc2.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
|
||||
hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc2.Init.NbrOfConversion = 1;
|
||||
hadc2.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc2) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_13;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_10;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* ADC3 init function */
|
||||
void MX_ADC3_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc3.Instance = ADC3;
|
||||
hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc3.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc3.Init.ScanConvMode = DISABLE;
|
||||
hadc3.Init.ContinuousConvMode = DISABLE;
|
||||
hadc3.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||||
hadc3.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
|
||||
hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc3.Init.NbrOfConversion = 1;
|
||||
hadc3.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc3) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_12;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_11;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc3, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(adcHandle->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 0 */
|
||||
/* ADC1 clock enable */
|
||||
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PC0 ------> ADC1_IN10
|
||||
PC1 ------> ADC1_IN11
|
||||
PC2 ------> ADC1_IN12
|
||||
PC3 ------> ADC1_IN13
|
||||
PA4 ------> ADC1_IN4
|
||||
PA5 ------> ADC1_IN5
|
||||
PA6 ------> ADC1_IN6
|
||||
PC5 ------> ADC1_IN15
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|M0_TEMP_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = M1_TEMP_Pin|AUX_TEMP_Pin|VBUS_S_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* ADC1 DMA Init */
|
||||
/* ADC1 Init */
|
||||
hdma_adc1.Instance = DMA2_Stream0;
|
||||
hdma_adc1.Init.Channel = DMA_CHANNEL_0;
|
||||
hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
|
||||
hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
|
||||
hdma_adc1.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_adc1.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_adc1.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(adcHandle,DMA_Handle,hdma_adc1);
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC2)
|
||||
{
|
||||
/* USER CODE BEGIN ADC2_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC2_MspInit 0 */
|
||||
/* ADC2 clock enable */
|
||||
__HAL_RCC_ADC2_CLK_ENABLE();
|
||||
|
||||
/**ADC2 GPIO Configuration
|
||||
PC0 ------> ADC2_IN10
|
||||
PC1 ------> ADC2_IN11
|
||||
PC2 ------> ADC2_IN12
|
||||
PC3 ------> ADC2_IN13
|
||||
PA4 ------> ADC2_IN4
|
||||
PA5 ------> ADC2_IN5
|
||||
PA6 ------> ADC2_IN6
|
||||
PC5 ------> ADC2_IN15
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|M0_TEMP_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = M1_TEMP_Pin|AUX_TEMP_Pin|VBUS_S_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC2_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC2_MspInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC3)
|
||||
{
|
||||
/* USER CODE BEGIN ADC3_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC3_MspInit 0 */
|
||||
/* ADC3 clock enable */
|
||||
__HAL_RCC_ADC3_CLK_ENABLE();
|
||||
|
||||
/**ADC3 GPIO Configuration
|
||||
PC0 ------> ADC3_IN10
|
||||
PC1 ------> ADC3_IN11
|
||||
PC2 ------> ADC3_IN12
|
||||
PC3 ------> ADC3_IN13
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC3_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC3_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
|
||||
if(adcHandle->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PC0 ------> ADC1_IN10
|
||||
PC1 ------> ADC1_IN11
|
||||
PC2 ------> ADC1_IN12
|
||||
PC3 ------> ADC1_IN13
|
||||
PA4 ------> ADC1_IN4
|
||||
PA5 ------> ADC1_IN5
|
||||
PA6 ------> ADC1_IN6
|
||||
PC5 ------> ADC1_IN15
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|M0_TEMP_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_TEMP_Pin|VBUS_S_Pin);
|
||||
|
||||
/* ADC1 DMA DeInit */
|
||||
HAL_DMA_DeInit(adcHandle->DMA_Handle);
|
||||
|
||||
/* ADC1 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC1:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC1:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC2)
|
||||
{
|
||||
/* USER CODE BEGIN ADC2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC2_CLK_DISABLE();
|
||||
|
||||
/**ADC2 GPIO Configuration
|
||||
PC0 ------> ADC2_IN10
|
||||
PC1 ------> ADC2_IN11
|
||||
PC2 ------> ADC2_IN12
|
||||
PC3 ------> ADC2_IN13
|
||||
PA4 ------> ADC2_IN4
|
||||
PA5 ------> ADC2_IN5
|
||||
PA6 ------> ADC2_IN6
|
||||
PC5 ------> ADC2_IN15
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|M0_TEMP_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_TEMP_Pin|VBUS_S_Pin);
|
||||
|
||||
/* ADC2 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC2:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC2:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC2_MspDeInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC3)
|
||||
{
|
||||
/* USER CODE BEGIN ADC3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC3_CLK_DISABLE();
|
||||
|
||||
/**ADC3 GPIO Configuration
|
||||
PC0 ------> ADC3_IN10
|
||||
PC1 ------> ADC3_IN11
|
||||
PC2 ------> ADC3_IN12
|
||||
PC3 ------> ADC3_IN13
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin);
|
||||
|
||||
/* ADC3 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC3:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC3:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC3_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
#endif // END ADC Include
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,177 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : CAN.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the CAN instances.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "can.h"
|
||||
|
||||
#include "gpio.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
CAN_HandleTypeDef hcan1 = {
|
||||
.Instance = CAN1,
|
||||
.Init = {
|
||||
.Prescaler = 8,
|
||||
.Mode = CAN_MODE_NORMAL,
|
||||
.SyncJumpWidth = CAN_SJW_4TQ,
|
||||
.TimeSeg1 = CAN_BS1_16TQ,
|
||||
.TimeSeg2 = CAN_BS2_4TQ,
|
||||
.TimeTriggeredMode = DISABLE,
|
||||
.AutoBusOff = ENABLE,
|
||||
.AutoWakeUp = ENABLE,
|
||||
.AutoRetransmission = ENABLE,
|
||||
.ReceiveFifoLocked = DISABLE,
|
||||
.TransmitFifoPriority = DISABLE,
|
||||
}
|
||||
};
|
||||
|
||||
/* CAN1 init function */
|
||||
//void MX_CAN1_Init(void)
|
||||
//{
|
||||
//
|
||||
// hcan1.Instance = CAN1;
|
||||
// hcan1.Init.Prescaler = 8;
|
||||
// hcan1.Init.Mode = CAN_MODE_NORMAL;
|
||||
// hcan1.Init.SyncJumpWidth = CAN_SJW_4TQ;
|
||||
// hcan1.Init.TimeSeg1 = CAN_BS1_16TQ;
|
||||
// hcan1.Init.TimeSeg2 = CAN_BS2_4TQ;
|
||||
// hcan1.Init.TimeTriggeredMode = DISABLE;
|
||||
// hcan1.Init.AutoBusOff = ENABLE;
|
||||
// hcan1.Init.AutoWakeUp = ENABLE;
|
||||
// hcan1.Init.AutoRetransmission = ENABLE;
|
||||
// hcan1.Init.ReceiveFifoLocked = DISABLE;
|
||||
// hcan1.Init.TransmitFifoPriority = DISABLE;
|
||||
// if (HAL_CAN_Init(&hcan1) != HAL_OK)
|
||||
// {
|
||||
// _Error_Handler(__FILE__, __LINE__);
|
||||
// }
|
||||
//
|
||||
//}
|
||||
//
|
||||
void HAL_CAN_MspInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(canHandle->Instance==CAN1)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_MspInit 0 */
|
||||
|
||||
/* USER CODE END CAN1_MspInit 0 */
|
||||
/* CAN1 clock enable */
|
||||
__HAL_RCC_CAN1_CLK_ENABLE();
|
||||
|
||||
/**CAN1 GPIO Configuration
|
||||
PB8 ------> CAN1_RX
|
||||
PB9 ------> CAN1_TX
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* CAN1 interrupt Init */
|
||||
HAL_NVIC_SetPriority(CAN1_TX_IRQn, 9, 0);
|
||||
HAL_NVIC_EnableIRQ(CAN1_TX_IRQn);
|
||||
HAL_NVIC_SetPriority(CAN1_RX0_IRQn, 9, 0);
|
||||
HAL_NVIC_EnableIRQ(CAN1_RX0_IRQn);
|
||||
HAL_NVIC_SetPriority(CAN1_RX1_IRQn, 9, 0);
|
||||
HAL_NVIC_EnableIRQ(CAN1_RX1_IRQn);
|
||||
HAL_NVIC_SetPriority(CAN1_SCE_IRQn, 9, 0);
|
||||
HAL_NVIC_EnableIRQ(CAN1_SCE_IRQn);
|
||||
/* USER CODE BEGIN CAN1_MspInit 1 */
|
||||
|
||||
/* USER CODE END CAN1_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* canHandle)
|
||||
{
|
||||
|
||||
if(canHandle->Instance==CAN1)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END CAN1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_CAN1_CLK_DISABLE();
|
||||
|
||||
/**CAN1 GPIO Configuration
|
||||
PB8 ------> CAN1_RX
|
||||
PB9 ------> CAN1_TX
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
|
||||
|
||||
/* CAN1 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(CAN1_TX_IRQn);
|
||||
HAL_NVIC_DisableIRQ(CAN1_RX0_IRQn);
|
||||
HAL_NVIC_DisableIRQ(CAN1_RX1_IRQn);
|
||||
HAL_NVIC_DisableIRQ(CAN1_SCE_IRQn);
|
||||
/* USER CODE BEGIN CAN1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END CAN1_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,114 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : dma.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of all the requested memory to memory DMA transfers.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "dma.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Configure DMA */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* Enable DMA controller clock
|
||||
*/
|
||||
void MX_DMA_Init(void)
|
||||
{
|
||||
/* DMA controller clock enable */
|
||||
__HAL_RCC_DMA1_CLK_ENABLE();
|
||||
__HAL_RCC_DMA2_CLK_ENABLE();
|
||||
|
||||
/* DMA interrupt init */
|
||||
/* DMA1_Stream0_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Stream0_IRQn, 4, 0); // SPI RX - must have lower priority than SPI TX
|
||||
// and higher priority than the control loop handler
|
||||
HAL_NVIC_EnableIRQ(DMA1_Stream0_IRQn);
|
||||
/* DMA1_Stream2_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Stream2_IRQn, 10, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Stream2_IRQn);
|
||||
/* DMA1_Stream4_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Stream4_IRQn, 10, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Stream4_IRQn);
|
||||
/* DMA1_Stream5_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Stream5_IRQn, 10, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Stream5_IRQn);
|
||||
/* DMA1_Stream6_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Stream6_IRQn, 10, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Stream6_IRQn);
|
||||
/* DMA1_Stream7_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Stream7_IRQn, 3, 0); // SPI TX - must have higher priority than SPI RX
|
||||
// and higher priority than the control loop handler
|
||||
HAL_NVIC_EnableIRQ(DMA1_Stream7_IRQn);
|
||||
/* DMA2_Stream0_IRQn interrupt configuration */
|
||||
// Dear STM, no we _don't_ want to fire an interrupt for this DMA
|
||||
// (it's not possible to deselect this in CubeMX)
|
||||
//HAL_NVIC_SetPriority(DMA2_Stream0_IRQn, 5, 0);
|
||||
//HAL_NVIC_EnableIRQ(DMA2_Stream0_IRQn);
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,177 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : freertos.c
|
||||
* Description : Code for freertos applications
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "FreeRTOS.h"
|
||||
#include "task.h"
|
||||
#include "main.h"
|
||||
#include "cmsis_os.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Variables */
|
||||
/* USER CODE END Variables */
|
||||
osThreadId defaultTaskHandle;
|
||||
const uint32_t stack_size_default_task = 2048; // Bytes
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN FunctionPrototypes */
|
||||
|
||||
/* USER CODE END FunctionPrototypes */
|
||||
|
||||
void StartDefaultTask(void * argument);
|
||||
|
||||
extern void MX_USB_DEVICE_Init(void);
|
||||
void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */
|
||||
|
||||
/* Hook prototypes */
|
||||
void vApplicationIdleHook(void);
|
||||
void vApplicationStackOverflowHook(xTaskHandle xTask, signed char *pcTaskName);
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
__weak void vApplicationIdleHook( void )
|
||||
{
|
||||
/* vApplicationIdleHook() will only be called if configUSE_IDLE_HOOK is set
|
||||
to 1 in FreeRTOSConfig.h. It will be called on each iteration of the idle
|
||||
task. It is essential that code added to this hook function never attempts
|
||||
to block in any way (for example, call xQueueReceive() with a block time
|
||||
specified, or call vTaskDelay()). If the application makes use of the
|
||||
vTaskDelete() API function (as this demo application does) then it is also
|
||||
important that vApplicationIdleHook() is permitted to return to its calling
|
||||
function, because it is the responsibility of the idle task to clean up
|
||||
memory allocated by the kernel to any task that has since been deleted. */
|
||||
}
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
__weak void vApplicationStackOverflowHook(xTaskHandle xTask, signed char *pcTaskName)
|
||||
{
|
||||
/* Run time stack overflow checking is performed if
|
||||
configCHECK_FOR_STACK_OVERFLOW is defined to 1 or 2. This hook function is
|
||||
called if a stack overflow is detected. */
|
||||
}
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief FreeRTOS initialization
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void MX_FREERTOS_Init(void) {
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* USER CODE BEGIN RTOS_MUTEX */
|
||||
/* add mutexes, ... */
|
||||
/* USER CODE END RTOS_MUTEX */
|
||||
|
||||
/* USER CODE BEGIN RTOS_SEMAPHORES */
|
||||
/* USER CODE END RTOS_SEMAPHORES */
|
||||
|
||||
/* USER CODE BEGIN RTOS_TIMERS */
|
||||
/* start timers, add new ones, ... */
|
||||
/* USER CODE END RTOS_TIMERS */
|
||||
|
||||
/* Create the thread(s) */
|
||||
/* definition and creation of defaultTask */
|
||||
osThreadDef(defaultTask, StartDefaultTask, osPriorityNormal, 0, stack_size_default_task / sizeof(StackType_t));
|
||||
defaultTaskHandle = osThreadCreate(osThread(defaultTask), NULL);
|
||||
|
||||
/* USER CODE BEGIN RTOS_THREADS */
|
||||
|
||||
/* USER CODE END RTOS_THREADS */
|
||||
|
||||
/* USER CODE BEGIN RTOS_QUEUES */
|
||||
/* add queues, ... */
|
||||
/* USER CODE END RTOS_QUEUES */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN Header_StartDefaultTask */
|
||||
/**
|
||||
* @brief Function implementing the defaultTask thread.
|
||||
* @param argument: Not used
|
||||
* @retval None
|
||||
*/
|
||||
/* USER CODE END Header_StartDefaultTask */
|
||||
void StartDefaultTask(void * argument)
|
||||
{
|
||||
/* init code for USB_DEVICE */
|
||||
MX_USB_DEVICE_Init();
|
||||
|
||||
/* USER CODE BEGIN StartDefaultTask */
|
||||
|
||||
/* USER CODE END StartDefaultTask */
|
||||
}
|
||||
|
||||
/* Private application code --------------------------------------------------*/
|
||||
/* USER CODE BEGIN Application */
|
||||
|
||||
/* USER CODE END Application */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,136 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : gpio.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of all used GPIO pins.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "gpio.h"
|
||||
/* USER CODE BEGIN 0 */
|
||||
#if HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 1 \
|
||||
|| HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 2
|
||||
#include "prev_board_ver/gpio_V3_2.c"
|
||||
#elif HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 3 \
|
||||
|| HW_VERSION_MAJOR == 3 && HW_VERSION_MINOR == 4
|
||||
#include "prev_board_ver/gpio_V3_4.c"
|
||||
#else
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* Configure GPIO */
|
||||
/*----------------------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/** Configure pins as
|
||||
* Analog
|
||||
* Input
|
||||
* Output
|
||||
* EVENT_OUT
|
||||
* EXTI
|
||||
*/
|
||||
void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, M0_nCS_Pin|M1_nCS_Pin, GPIO_PIN_SET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(EN_GATE_GPIO_Port, EN_GATE_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pins : PCPin PCPin */
|
||||
GPIO_InitStruct.Pin = M0_nCS_Pin|M1_nCS_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PCPin PCPin PCPin */
|
||||
GPIO_InitStruct.Pin = M1_ENC_Z_Pin|GPIO_5_Pin|M0_ENC_Z_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = EN_GATE_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(EN_GATE_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = nFAULT_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(nFAULT_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 2 */
|
||||
#endif // End GPIO Include
|
||||
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,186 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : I2C.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the I2C instances.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "i2c.h"
|
||||
|
||||
#include "gpio.h"
|
||||
#include "dma.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
I2C_HandleTypeDef hi2c1;
|
||||
DMA_HandleTypeDef hdma_i2c1_rx;
|
||||
DMA_HandleTypeDef hdma_i2c1_tx;
|
||||
|
||||
/* I2C1 init function */
|
||||
void MX_I2C1_Init(uint8_t addr)
|
||||
{
|
||||
|
||||
hi2c1.Instance = I2C1;
|
||||
hi2c1.Init.ClockSpeed = 100000;
|
||||
hi2c1.Init.DutyCycle = I2C_DUTYCYCLE_2;
|
||||
hi2c1.Init.OwnAddress1 = addr << 1;
|
||||
hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
|
||||
hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
||||
hi2c1.Init.OwnAddress2 = 0;
|
||||
hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
||||
hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
||||
if (HAL_I2C_Init(&hi2c1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_I2C_MspInit(I2C_HandleTypeDef* i2cHandle)
|
||||
{
|
||||
|
||||
if(i2cHandle->Instance==I2C1)
|
||||
{
|
||||
/* USER CODE BEGIN I2C1_MspInit 0 */
|
||||
|
||||
/* USER CODE END I2C1_MspInit 0 */
|
||||
|
||||
/* I2C1 clock enable */
|
||||
__HAL_RCC_I2C1_CLK_ENABLE();
|
||||
|
||||
/* I2C1 DMA Init */
|
||||
/* I2C1_RX Init */
|
||||
hdma_i2c1_rx.Instance = DMA1_Stream0;
|
||||
hdma_i2c1_rx.Init.Channel = DMA_CHANNEL_1;
|
||||
hdma_i2c1_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_i2c1_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_i2c1_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_i2c1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_i2c1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_i2c1_rx.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_i2c1_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_i2c1_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_i2c1_rx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(i2cHandle,hdmarx,hdma_i2c1_rx);
|
||||
|
||||
/* I2C1_TX Init */
|
||||
hdma_i2c1_tx.Instance = DMA1_Stream6;
|
||||
hdma_i2c1_tx.Init.Channel = DMA_CHANNEL_1;
|
||||
hdma_i2c1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_i2c1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_i2c1_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_i2c1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_i2c1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_i2c1_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_i2c1_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_i2c1_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_i2c1_tx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(i2cHandle,hdmatx,hdma_i2c1_tx);
|
||||
|
||||
/* I2C1 interrupt Init */
|
||||
HAL_NVIC_SetPriority(I2C1_EV_IRQn, 9, 0);
|
||||
HAL_NVIC_EnableIRQ(I2C1_EV_IRQn);
|
||||
HAL_NVIC_SetPriority(I2C1_ER_IRQn, 9, 0);
|
||||
HAL_NVIC_EnableIRQ(I2C1_ER_IRQn);
|
||||
/* USER CODE BEGIN I2C1_MspInit 1 */
|
||||
|
||||
/* USER CODE END I2C1_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* i2cHandle)
|
||||
{
|
||||
|
||||
if(i2cHandle->Instance==I2C1)
|
||||
{
|
||||
/* USER CODE BEGIN I2C1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END I2C1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_I2C1_CLK_DISABLE();
|
||||
|
||||
/**I2C1 GPIO Configuration
|
||||
PB8 ------> I2C1_SCL
|
||||
PB9 ------> I2C1_SDA
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
|
||||
|
||||
/* I2C1 DMA DeInit */
|
||||
HAL_DMA_DeInit(i2cHandle->hdmarx);
|
||||
HAL_DMA_DeInit(i2cHandle->hdmatx);
|
||||
|
||||
/* I2C1 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(I2C1_EV_IRQn);
|
||||
HAL_NVIC_DisableIRQ(I2C1_ER_IRQn);
|
||||
/* USER CODE BEGIN I2C1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END I2C1_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,280 @@
|
||||
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : main.c
|
||||
* @brief : Main program body
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32f4xx_hal.h"
|
||||
#include "cmsis_os.h"
|
||||
#include "adc.h"
|
||||
#include "can.h"
|
||||
#include "dma.h"
|
||||
#include "spi.h"
|
||||
#include "tim.h"
|
||||
#include "usart.h"
|
||||
#include "usb_device.h"
|
||||
#include "gpio.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
void MX_FREERTOS_Init(void);
|
||||
|
||||
/* USER CODE BEGIN PFP */
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* => Nope. We provide our own.
|
||||
*
|
||||
* @retval None
|
||||
*/
|
||||
//int main(void)
|
||||
//{
|
||||
#if 0
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration----------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_DMA_Init();
|
||||
MX_ADC1_Init();
|
||||
MX_ADC2_Init();
|
||||
// MX_CAN1_Init(); // CAN or I2C called in main.cpp instead
|
||||
MX_TIM1_Init();
|
||||
MX_TIM8_Init();
|
||||
MX_TIM3_Init();
|
||||
MX_TIM4_Init();
|
||||
MX_SPI3_Init();
|
||||
MX_ADC3_Init();
|
||||
MX_TIM2_Init();
|
||||
MX_UART4_Init();
|
||||
MX_TIM5_Init();
|
||||
MX_TIM13_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Call init function for freertos objects (in freertos.c) */
|
||||
MX_FREERTOS_Init();
|
||||
|
||||
/* Start scheduler */
|
||||
osKernelStart();
|
||||
|
||||
/* We should never get here as control is now taken by the scheduler */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
||||
/**Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 4;
|
||||
RCC_OscInitStruct.PLL.PLLN = 168;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure the Systick interrupt time
|
||||
*/
|
||||
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
|
||||
|
||||
/**Configure the Systick
|
||||
*/
|
||||
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
|
||||
|
||||
/* SysTick_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief Period elapsed callback in non blocking mode
|
||||
* @note This function is called when TIM14 interrupt took place, inside
|
||||
* HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
|
||||
* a global variable "uwTick" used as application time base.
|
||||
* @param htim : TIM handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
|
||||
{
|
||||
/* USER CODE BEGIN Callback 0 */
|
||||
|
||||
/* USER CODE END Callback 0 */
|
||||
if (htim->Instance == TIM14) {
|
||||
HAL_IncTick();
|
||||
}
|
||||
/* USER CODE BEGIN Callback 1 */
|
||||
|
||||
/* USER CODE END Callback 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @param file: The file name as string.
|
||||
* @param line: The line in file as a number.
|
||||
* @retval None
|
||||
*/
|
||||
void _Error_Handler(char *file, int line)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
while(1) // TODO: do something more useful
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t* file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,390 @@
|
||||
|
||||
ADC_HandleTypeDef hadc1;
|
||||
ADC_HandleTypeDef hadc2;
|
||||
ADC_HandleTypeDef hadc3;
|
||||
DMA_HandleTypeDef hdma_adc1;
|
||||
|
||||
/* ADC1 init function */
|
||||
void MX_ADC1_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc1.Instance = ADC1;
|
||||
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc1.Init.ScanConvMode = DISABLE;
|
||||
hadc1.Init.ContinuousConvMode = DISABLE;
|
||||
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc1.Init.NbrOfConversion = 1;
|
||||
hadc1.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_0;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_0;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* ADC2 init function */
|
||||
void MX_ADC2_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc2.Instance = ADC2;
|
||||
hadc2.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc2.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc2.Init.ScanConvMode = DISABLE;
|
||||
hadc2.Init.ContinuousConvMode = DISABLE;
|
||||
hadc2.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||||
hadc2.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
|
||||
hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc2.Init.NbrOfConversion = 1;
|
||||
hadc2.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc2) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_13;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_10;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* ADC3 init function */
|
||||
void MX_ADC3_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc3.Instance = ADC3;
|
||||
hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc3.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc3.Init.ScanConvMode = DISABLE;
|
||||
hadc3.Init.ContinuousConvMode = DISABLE;
|
||||
hadc3.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||||
hadc3.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
|
||||
hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc3.Init.NbrOfConversion = 1;
|
||||
hadc3.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc3) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_12;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_11;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc3, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(adcHandle->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 0 */
|
||||
/* ADC1 clock enable */
|
||||
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PC0 ------> ADC1_IN10
|
||||
PC1 ------> ADC1_IN11
|
||||
PC2 ------> ADC1_IN12
|
||||
PC3 ------> ADC1_IN13
|
||||
PA0-WKUP ------> ADC1_IN0
|
||||
PA1 ------> ADC1_IN1
|
||||
PA2 ------> ADC1_IN2
|
||||
PA6 ------> ADC1_IN6
|
||||
PC4 ------> ADC1_IN14
|
||||
PC5 ------> ADC1_IN15
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|AUX_TEMP_Pin|M0_TEMP_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = VBUS_S_Pin|M1_TEMP_Pin|AUX_I_Pin|AUX_V_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* ADC1 DMA Init */
|
||||
/* ADC1 Init */
|
||||
hdma_adc1.Instance = DMA2_Stream0;
|
||||
hdma_adc1.Init.Channel = DMA_CHANNEL_0;
|
||||
hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
|
||||
hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
|
||||
hdma_adc1.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_adc1.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_adc1.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(adcHandle,DMA_Handle,hdma_adc1);
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC2)
|
||||
{
|
||||
/* USER CODE BEGIN ADC2_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC2_MspInit 0 */
|
||||
/* ADC2 clock enable */
|
||||
__HAL_RCC_ADC2_CLK_ENABLE();
|
||||
|
||||
/**ADC2 GPIO Configuration
|
||||
PC0 ------> ADC2_IN10
|
||||
PC1 ------> ADC2_IN11
|
||||
PC2 ------> ADC2_IN12
|
||||
PC3 ------> ADC2_IN13
|
||||
PA0-WKUP ------> ADC2_IN0
|
||||
PA1 ------> ADC2_IN1
|
||||
PA2 ------> ADC2_IN2
|
||||
PA6 ------> ADC2_IN6
|
||||
PC4 ------> ADC2_IN14
|
||||
PC5 ------> ADC2_IN15
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|AUX_TEMP_Pin|M0_TEMP_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = VBUS_S_Pin|M1_TEMP_Pin|AUX_I_Pin|AUX_V_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC2_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC2_MspInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC3)
|
||||
{
|
||||
/* USER CODE BEGIN ADC3_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC3_MspInit 0 */
|
||||
/* ADC3 clock enable */
|
||||
__HAL_RCC_ADC3_CLK_ENABLE();
|
||||
|
||||
/**ADC3 GPIO Configuration
|
||||
PC0 ------> ADC3_IN10
|
||||
PC1 ------> ADC3_IN11
|
||||
PC2 ------> ADC3_IN12
|
||||
PC3 ------> ADC3_IN13
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC3_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC3_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
|
||||
if(adcHandle->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PC0 ------> ADC1_IN10
|
||||
PC1 ------> ADC1_IN11
|
||||
PC2 ------> ADC1_IN12
|
||||
PC3 ------> ADC1_IN13
|
||||
PA0-WKUP ------> ADC1_IN0
|
||||
PA1 ------> ADC1_IN1
|
||||
PA2 ------> ADC1_IN2
|
||||
PA6 ------> ADC1_IN6
|
||||
PC4 ------> ADC1_IN14
|
||||
PC5 ------> ADC1_IN15
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|AUX_TEMP_Pin|M0_TEMP_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, VBUS_S_Pin|M1_TEMP_Pin|AUX_I_Pin|AUX_V_Pin);
|
||||
|
||||
/* ADC1 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC1:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC1:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC2)
|
||||
{
|
||||
/* USER CODE BEGIN ADC2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC2_CLK_DISABLE();
|
||||
|
||||
/**ADC2 GPIO Configuration
|
||||
PC0 ------> ADC2_IN10
|
||||
PC1 ------> ADC2_IN11
|
||||
PC2 ------> ADC2_IN12
|
||||
PC3 ------> ADC2_IN13
|
||||
PA0-WKUP ------> ADC2_IN0
|
||||
PA1 ------> ADC2_IN1
|
||||
PA2 ------> ADC2_IN2
|
||||
PA6 ------> ADC2_IN6
|
||||
PC4 ------> ADC2_IN14
|
||||
PC5 ------> ADC2_IN15
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|AUX_TEMP_Pin|M0_TEMP_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, VBUS_S_Pin|M1_TEMP_Pin|AUX_I_Pin|AUX_V_Pin);
|
||||
|
||||
/* ADC2 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC2:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC2:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC2_MspDeInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC3)
|
||||
{
|
||||
/* USER CODE BEGIN ADC3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC3_CLK_DISABLE();
|
||||
|
||||
/**ADC3 GPIO Configuration
|
||||
PC0 ------> ADC3_IN10
|
||||
PC1 ------> ADC3_IN11
|
||||
PC2 ------> ADC3_IN12
|
||||
PC3 ------> ADC3_IN13
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin);
|
||||
|
||||
/* ADC3 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC3:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC3:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC3_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,386 @@
|
||||
|
||||
ADC_HandleTypeDef hadc1;
|
||||
ADC_HandleTypeDef hadc2;
|
||||
ADC_HandleTypeDef hadc3;
|
||||
DMA_HandleTypeDef hdma_adc1;
|
||||
|
||||
/* ADC1 init function */
|
||||
void MX_ADC1_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc1.Instance = ADC1;
|
||||
hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc1.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc1.Init.ScanConvMode = DISABLE;
|
||||
hadc1.Init.ContinuousConvMode = DISABLE;
|
||||
hadc1.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
|
||||
hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
|
||||
hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc1.Init.NbrOfConversion = 1;
|
||||
hadc1.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_6;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_6;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc1, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* ADC2 init function */
|
||||
void MX_ADC2_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc2.Instance = ADC2;
|
||||
hadc2.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc2.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc2.Init.ScanConvMode = DISABLE;
|
||||
hadc2.Init.ContinuousConvMode = DISABLE;
|
||||
hadc2.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc2.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||||
hadc2.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
|
||||
hadc2.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc2.Init.NbrOfConversion = 1;
|
||||
hadc2.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc2.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc2) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_13;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc2, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_10;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc2, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* ADC3 init function */
|
||||
void MX_ADC3_Init(void)
|
||||
{
|
||||
ADC_ChannelConfTypeDef sConfig;
|
||||
ADC_InjectionConfTypeDef sConfigInjected;
|
||||
|
||||
/**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
|
||||
*/
|
||||
hadc3.Instance = ADC3;
|
||||
hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
|
||||
hadc3.Init.Resolution = ADC_RESOLUTION_12B;
|
||||
hadc3.Init.ScanConvMode = DISABLE;
|
||||
hadc3.Init.ContinuousConvMode = DISABLE;
|
||||
hadc3.Init.DiscontinuousConvMode = DISABLE;
|
||||
hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_RISING;
|
||||
hadc3.Init.ExternalTrigConv = ADC_EXTERNALTRIGCONV_T8_TRGO;
|
||||
hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
|
||||
hadc3.Init.NbrOfConversion = 1;
|
||||
hadc3.Init.DMAContinuousRequests = DISABLE;
|
||||
hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
|
||||
if (HAL_ADC_Init(&hadc3) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
|
||||
*/
|
||||
sConfig.Channel = ADC_CHANNEL_12;
|
||||
sConfig.Rank = 1;
|
||||
sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time
|
||||
*/
|
||||
sConfigInjected.InjectedChannel = ADC_CHANNEL_11;
|
||||
sConfigInjected.InjectedRank = 1;
|
||||
sConfigInjected.InjectedNbrOfConversion = 1;
|
||||
sConfigInjected.InjectedSamplingTime = ADC_SAMPLETIME_3CYCLES;
|
||||
sConfigInjected.ExternalTrigInjecConvEdge = ADC_EXTERNALTRIGINJECCONVEDGE_RISING;
|
||||
sConfigInjected.ExternalTrigInjecConv = ADC_EXTERNALTRIGINJECCONV_T1_TRGO;
|
||||
sConfigInjected.AutoInjectedConv = DISABLE;
|
||||
sConfigInjected.InjectedDiscontinuousConvMode = DISABLE;
|
||||
sConfigInjected.InjectedOffset = 0;
|
||||
if (HAL_ADCEx_InjectedConfigChannel(&hadc3, &sConfigInjected) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(adcHandle->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 0 */
|
||||
/* ADC1 clock enable */
|
||||
__HAL_RCC_ADC1_CLK_ENABLE();
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PC0 ------> ADC1_IN10
|
||||
PC1 ------> ADC1_IN11
|
||||
PC2 ------> ADC1_IN12
|
||||
PC3 ------> ADC1_IN13
|
||||
PA4 ------> ADC1_IN4
|
||||
PA5 ------> ADC1_IN5
|
||||
PA6 ------> ADC1_IN6
|
||||
PC4 ------> ADC1_IN14
|
||||
PC5 ------> ADC1_IN15
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|AUX_TEMP_Pin|M0_TEMP_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = M1_TEMP_Pin|AUX_I_Pin|VBUS_S_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* ADC1 DMA Init */
|
||||
/* ADC1 Init */
|
||||
hdma_adc1.Instance = DMA2_Stream0;
|
||||
hdma_adc1.Init.Channel = DMA_CHANNEL_0;
|
||||
hdma_adc1.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_adc1.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
|
||||
hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
|
||||
hdma_adc1.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_adc1.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_adc1.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(adcHandle,DMA_Handle,hdma_adc1);
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC2)
|
||||
{
|
||||
/* USER CODE BEGIN ADC2_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC2_MspInit 0 */
|
||||
/* ADC2 clock enable */
|
||||
__HAL_RCC_ADC2_CLK_ENABLE();
|
||||
|
||||
/**ADC2 GPIO Configuration
|
||||
PC0 ------> ADC2_IN10
|
||||
PC1 ------> ADC2_IN11
|
||||
PC2 ------> ADC2_IN12
|
||||
PC3 ------> ADC2_IN13
|
||||
PA4 ------> ADC2_IN4
|
||||
PA5 ------> ADC2_IN5
|
||||
PA6 ------> ADC2_IN6
|
||||
PC4 ------> ADC2_IN14
|
||||
PC5 ------> ADC2_IN15
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|AUX_TEMP_Pin|M0_TEMP_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = M1_TEMP_Pin|AUX_I_Pin|VBUS_S_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC2_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC2_MspInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC3)
|
||||
{
|
||||
/* USER CODE BEGIN ADC3_MspInit 0 */
|
||||
|
||||
/* USER CODE END ADC3_MspInit 0 */
|
||||
/* ADC3 clock enable */
|
||||
__HAL_RCC_ADC3_CLK_ENABLE();
|
||||
|
||||
/**ADC3 GPIO Configuration
|
||||
PC0 ------> ADC3_IN10
|
||||
PC1 ------> ADC3_IN11
|
||||
PC2 ------> ADC3_IN12
|
||||
PC3 ------> ADC3_IN13
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN ADC3_MspInit 1 */
|
||||
|
||||
/* USER CODE END ADC3_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* adcHandle)
|
||||
{
|
||||
|
||||
if(adcHandle->Instance==ADC1)
|
||||
{
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC1_CLK_DISABLE();
|
||||
|
||||
/**ADC1 GPIO Configuration
|
||||
PC0 ------> ADC1_IN10
|
||||
PC1 ------> ADC1_IN11
|
||||
PC2 ------> ADC1_IN12
|
||||
PC3 ------> ADC1_IN13
|
||||
PA4 ------> ADC1_IN4
|
||||
PA5 ------> ADC1_IN5
|
||||
PA6 ------> ADC1_IN6
|
||||
PC4 ------> ADC1_IN14
|
||||
PC5 ------> ADC1_IN15
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|AUX_TEMP_Pin|M0_TEMP_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_I_Pin|VBUS_S_Pin);
|
||||
|
||||
/* ADC1 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC1:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC1:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC1_MspDeInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC2)
|
||||
{
|
||||
/* USER CODE BEGIN ADC2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC2_CLK_DISABLE();
|
||||
|
||||
/**ADC2 GPIO Configuration
|
||||
PC0 ------> ADC2_IN10
|
||||
PC1 ------> ADC2_IN11
|
||||
PC2 ------> ADC2_IN12
|
||||
PC3 ------> ADC2_IN13
|
||||
PA4 ------> ADC2_IN4
|
||||
PA5 ------> ADC2_IN5
|
||||
PA6 ------> ADC2_IN6
|
||||
PC4 ------> ADC2_IN14
|
||||
PC5 ------> ADC2_IN15
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin
|
||||
|AUX_TEMP_Pin|M0_TEMP_Pin);
|
||||
|
||||
HAL_GPIO_DeInit(GPIOA, M1_TEMP_Pin|AUX_I_Pin|VBUS_S_Pin);
|
||||
|
||||
/* ADC2 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC2:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC2:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC2_MspDeInit 1 */
|
||||
}
|
||||
else if(adcHandle->Instance==ADC3)
|
||||
{
|
||||
/* USER CODE BEGIN ADC3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END ADC3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_ADC3_CLK_DISABLE();
|
||||
|
||||
/**ADC3 GPIO Configuration
|
||||
PC0 ------> ADC3_IN10
|
||||
PC1 ------> ADC3_IN11
|
||||
PC2 ------> ADC3_IN12
|
||||
PC3 ------> ADC3_IN13
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, M0_IB_Pin|M0_IC_Pin|M1_IC_Pin|M1_IB_Pin);
|
||||
|
||||
/* ADC3 interrupt Deinit */
|
||||
/* USER CODE BEGIN ADC3:ADC_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "ADC_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(ADC_IRQn); */
|
||||
/* USER CODE END ADC3:ADC_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN ADC3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END ADC3_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,86 @@
|
||||
/** Configure pins as
|
||||
* Analog
|
||||
* Input
|
||||
* Output
|
||||
* EVENT_OUT
|
||||
* EXTI
|
||||
*/
|
||||
void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, M0_nCS_Pin|M1_nCS_Pin, GPIO_PIN_SET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, M1_DC_CAL_Pin|M0_DC_CAL_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(EN_GATE_GPIO_Port, EN_GATE_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pins : PCPin PCPin PCPin PCPin */
|
||||
GPIO_InitStruct.Pin = M0_nCS_Pin|M1_nCS_Pin|M1_DC_CAL_Pin|M0_DC_CAL_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PAPin PAPin */
|
||||
GPIO_InitStruct.Pin = GPIO_4_Pin|GPIO_2_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = GPIO_3_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
HAL_GPIO_Init(GPIO_3_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = GPIO_1_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
HAL_GPIO_Init(GPIO_1_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = EN_GATE_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(EN_GATE_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = M0_ENC_Z_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(M0_ENC_Z_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = nFAULT_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(nFAULT_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = M1_ENC_Z_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(M1_ENC_Z_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/* EXTI interrupt init*/
|
||||
HAL_NVIC_SetPriority(EXTI2_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI2_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI4_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI4_IRQn);
|
||||
|
||||
}
|
||||
@@ -0,0 +1,71 @@
|
||||
/** Configure pins as
|
||||
* Analog
|
||||
* Input
|
||||
* Output
|
||||
* EVENT_OUT
|
||||
* EXTI
|
||||
*/
|
||||
void MX_GPIO_Init(void)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOH_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOD_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, M0_nCS_Pin|M1_nCS_Pin, GPIO_PIN_SET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(GPIOC, M1_DC_CAL_Pin|M0_DC_CAL_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
HAL_GPIO_WritePin(EN_GATE_GPIO_Port, EN_GATE_Pin, GPIO_PIN_RESET);
|
||||
|
||||
/*Configure GPIO pins : PCPin PCPin PCPin PCPin */
|
||||
GPIO_InitStruct.Pin = M0_nCS_Pin|M1_nCS_Pin|M1_DC_CAL_Pin|M0_DC_CAL_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = GPIO_3_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
HAL_GPIO_Init(GPIO_3_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PAPin PAPin */
|
||||
GPIO_InitStruct.Pin = GPIO_4_Pin|M0_ENC_Z_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pins : PBPin PBPin */
|
||||
GPIO_InitStruct.Pin = GPIO_5_Pin|M1_ENC_Z_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = EN_GATE_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(EN_GATE_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = nFAULT_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(nFAULT_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/* EXTI interrupt init*/
|
||||
HAL_NVIC_SetPriority(EXTI2_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI2_IRQn);
|
||||
|
||||
}
|
||||
@@ -0,0 +1,216 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : SPI.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the SPI instances.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "spi.h"
|
||||
|
||||
#include "gpio.h"
|
||||
#include "dma.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
SPI_HandleTypeDef hspi3;
|
||||
DMA_HandleTypeDef hdma_spi3_tx;
|
||||
DMA_HandleTypeDef hdma_spi3_rx;
|
||||
|
||||
/* SPI3 init function */
|
||||
void MX_SPI3_Init(void)
|
||||
{
|
||||
|
||||
hspi3.Instance = SPI3;
|
||||
hspi3.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi3.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi3.Init.DataSize = SPI_DATASIZE_16BIT;
|
||||
hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||
hspi3.Init.CLKPhase = SPI_PHASE_2EDGE;
|
||||
hspi3.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
|
||||
hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi3.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi3.Init.CRCPolynomial = 10;
|
||||
if (HAL_SPI_Init(&hspi3) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(spiHandle->Instance==SPI3)
|
||||
{
|
||||
/* USER CODE BEGIN SPI3_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI3_MspInit 0 */
|
||||
/* SPI3 clock enable */
|
||||
__HAL_RCC_SPI3_CLK_ENABLE();
|
||||
|
||||
/**SPI3 GPIO Configuration
|
||||
PC10 ------> SPI3_SCK
|
||||
PC11 ------> SPI3_MISO
|
||||
PC12 ------> SPI3_MOSI
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_12;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN; // Idle clock and MOSI low.
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
// MISO pull-up required for disconnect detection on SPI encoders with even parity
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* SPI3 DMA Init */
|
||||
/* SPI3_TX Init */
|
||||
hdma_spi3_tx.Instance = DMA1_Stream7;
|
||||
hdma_spi3_tx.Init.Channel = DMA_CHANNEL_0;
|
||||
hdma_spi3_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_spi3_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_spi3_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
|
||||
if(spiHandle->Init.DataSize == SPI_DATASIZE_8BIT){
|
||||
hdma_spi3_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_spi3_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
} else {
|
||||
hdma_spi3_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
|
||||
hdma_spi3_tx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
|
||||
}
|
||||
|
||||
hdma_spi3_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_spi3_tx.Init.Priority = DMA_PRIORITY_HIGH; // SPI TX must have higher priority than SPI RX
|
||||
hdma_spi3_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_spi3_tx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(spiHandle,hdmatx,hdma_spi3_tx);
|
||||
|
||||
/* SPI3_RX Init */
|
||||
hdma_spi3_rx.Instance = DMA1_Stream0;
|
||||
hdma_spi3_rx.Init.Channel = DMA_CHANNEL_0;
|
||||
hdma_spi3_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_spi3_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_spi3_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
if (spiHandle->Init.DataSize == SPI_DATASIZE_8BIT) {
|
||||
hdma_spi3_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_spi3_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
} else {
|
||||
hdma_spi3_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
|
||||
hdma_spi3_rx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
|
||||
}
|
||||
hdma_spi3_rx.Init.Mode = DMA_NORMAL;
|
||||
hdma_spi3_rx.Init.Priority = DMA_PRIORITY_MEDIUM;
|
||||
hdma_spi3_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_spi3_rx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(spiHandle,hdmarx,hdma_spi3_rx);
|
||||
|
||||
/* SPI3 interrupt Init */
|
||||
//HAL_NVIC_SetPriority(SPI3_IRQn, 3, 0);
|
||||
//HAL_NVIC_EnableIRQ(SPI3_IRQn);
|
||||
/* USER CODE BEGIN SPI3_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI3_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
|
||||
{
|
||||
|
||||
if(spiHandle->Instance==SPI3)
|
||||
{
|
||||
/* USER CODE BEGIN SPI3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI3_CLK_DISABLE();
|
||||
|
||||
/**SPI3 GPIO Configuration
|
||||
PC10 ------> SPI3_SCK
|
||||
PC11 ------> SPI3_MISO
|
||||
PC12 ------> SPI3_MOSI
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12);
|
||||
|
||||
/* SPI3 DMA DeInit */
|
||||
HAL_DMA_DeInit(spiHandle->hdmatx);
|
||||
HAL_DMA_DeInit(spiHandle->hdmarx);
|
||||
|
||||
/* SPI3 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(SPI3_IRQn);
|
||||
/* USER CODE BEGIN SPI3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SPI3_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,102 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : stm32f4xx_hal_msp.c
|
||||
* Description : This file provides code for the MSP Initialization
|
||||
* and de-Initialization codes.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
extern void _Error_Handler(char *, int);
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
/**
|
||||
* Initializes the Global MSP.
|
||||
*/
|
||||
void HAL_MspInit(void)
|
||||
{
|
||||
/* USER CODE BEGIN MspInit 0 */
|
||||
|
||||
/* USER CODE END MspInit 0 */
|
||||
|
||||
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
|
||||
|
||||
/* System interrupt init*/
|
||||
/* MemoryManagement_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(MemoryManagement_IRQn, 0, 0);
|
||||
/* BusFault_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(BusFault_IRQn, 0, 0);
|
||||
/* UsageFault_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(UsageFault_IRQn, 0, 0);
|
||||
/* SVCall_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(SVCall_IRQn, 3, 0);
|
||||
/* DebugMonitor_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DebugMonitor_IRQn, 0, 0);
|
||||
/* PendSV_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
|
||||
/* SysTick_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
|
||||
|
||||
/* USER CODE BEGIN MspInit 1 */
|
||||
|
||||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,158 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_timebase_TIM.c
|
||||
* @brief HAL time base based on the hardware TIM.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
/** @addtogroup STM32F7xx_HAL_Examples
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup HAL_TimeBase
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
TIM_HandleTypeDef htim14;
|
||||
uint32_t uwIncrementState = 0;
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief This function configures the TIM14 as a time base source.
|
||||
* The time source is configured to have 1ms time base with a dedicated
|
||||
* Tick interrupt priority.
|
||||
* @note This function is called automatically at the beginning of program after
|
||||
* reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
|
||||
* @param TickPriority: Tick interrupt priorty.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
|
||||
{
|
||||
RCC_ClkInitTypeDef clkconfig;
|
||||
uint32_t uwTimclock = 0;
|
||||
uint32_t uwPrescalerValue = 0;
|
||||
uint32_t pFLatency;
|
||||
|
||||
/*Configure the TIM14 IRQ priority */
|
||||
HAL_NVIC_SetPriority(TIM8_TRG_COM_TIM14_IRQn, TickPriority ,0);
|
||||
|
||||
/* Enable the TIM14 global Interrupt */
|
||||
HAL_NVIC_EnableIRQ(TIM8_TRG_COM_TIM14_IRQn);
|
||||
|
||||
/* Enable TIM14 clock */
|
||||
__HAL_RCC_TIM14_CLK_ENABLE();
|
||||
|
||||
/* Get clock configuration */
|
||||
HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
|
||||
|
||||
/* Compute TIM14 clock */
|
||||
uwTimclock = 2*HAL_RCC_GetPCLK1Freq();
|
||||
|
||||
/* Compute the prescaler value to have TIM14 counter clock equal to 1MHz */
|
||||
uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000) - 1);
|
||||
|
||||
/* Initialize TIM14 */
|
||||
htim14.Instance = TIM14;
|
||||
|
||||
/* Initialize TIMx peripheral as follow:
|
||||
+ Period = [(TIM14CLK/1000) - 1]. to have a (1/1000) s time base.
|
||||
+ Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
|
||||
+ ClockDivision = 0
|
||||
+ Counter direction = Up
|
||||
*/
|
||||
htim14.Init.Period = (1000000 / 1000) - 1;
|
||||
htim14.Init.Prescaler = uwPrescalerValue;
|
||||
htim14.Init.ClockDivision = 0;
|
||||
htim14.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
if(HAL_TIM_Base_Init(&htim14) == HAL_OK)
|
||||
{
|
||||
/* Start the TIM time Base generation in interrupt mode */
|
||||
return HAL_TIM_Base_Start_IT(&htim14);
|
||||
}
|
||||
|
||||
/* Return function status */
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Suspend Tick increment.
|
||||
* @note Disable the tick increment by disabling TIM14 update interrupt.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_SuspendTick(void)
|
||||
{
|
||||
/* Disable TIM14 update Interrupt */
|
||||
__HAL_TIM_DISABLE_IT(&htim14, TIM_IT_UPDATE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Resume Tick increment.
|
||||
* @note Enable the tick increment by Enabling TIM14 update interrupt.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_ResumeTick(void)
|
||||
{
|
||||
/* Enable TIM14 Update interrupt */
|
||||
__HAL_TIM_ENABLE_IT(&htim14, TIM_IT_UPDATE);
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,416 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_it.c
|
||||
* @brief Interrupt Service Routines.
|
||||
******************************************************************************
|
||||
*
|
||||
* COPYRIGHT(c) 2018 STMicroelectronics
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
#include "stm32f4xx.h"
|
||||
#include "stm32f4xx_it.h"
|
||||
#include "cmsis_os.h"
|
||||
#include <stdbool.h>
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
#include <Drivers/STM32/stm32_system.h>
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* External variables --------------------------------------------------------*/
|
||||
extern PCD_HandleTypeDef hpcd_USB_OTG_FS;
|
||||
extern ADC_HandleTypeDef hadc1;
|
||||
extern ADC_HandleTypeDef hadc2;
|
||||
extern ADC_HandleTypeDef hadc3;
|
||||
extern CAN_HandleTypeDef hcan1;
|
||||
extern DMA_HandleTypeDef hdma_spi3_tx;
|
||||
extern DMA_HandleTypeDef hdma_spi3_rx;
|
||||
extern SPI_HandleTypeDef hspi3;
|
||||
extern TIM_HandleTypeDef htim5;
|
||||
extern TIM_HandleTypeDef htim8;
|
||||
extern DMA_HandleTypeDef hdma_uart4_rx;
|
||||
extern DMA_HandleTypeDef hdma_uart4_tx;
|
||||
extern DMA_HandleTypeDef hdma_usart2_rx;
|
||||
extern DMA_HandleTypeDef hdma_usart2_tx;
|
||||
extern UART_HandleTypeDef huart4;
|
||||
extern UART_HandleTypeDef huart2;
|
||||
|
||||
extern TIM_HandleTypeDef htim14;
|
||||
|
||||
/******************************************************************************/
|
||||
/* Cortex-M4 Processor Interruption and Exception Handlers */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles Non maskable interrupt.
|
||||
*/
|
||||
void NMI_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
|
||||
COUNT_IRQ(NonMaskableInt_IRQn);
|
||||
/* USER CODE END NonMaskableInt_IRQn 0 */
|
||||
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
|
||||
|
||||
/* USER CODE END NonMaskableInt_IRQn 1 */
|
||||
}
|
||||
|
||||
__attribute__((used))
|
||||
void get_regs(void** stack_ptr) {
|
||||
TIM1->BDTR &= ~(TIM_BDTR_AOE_Msk | TIM_BDTR_MOE_Msk); // disable M0 PWM
|
||||
TIM8->BDTR &= ~(TIM_BDTR_AOE_Msk | TIM_BDTR_MOE_Msk); // disable M1 PWM
|
||||
|
||||
void* volatile r0 __attribute__((unused)) = stack_ptr[0];
|
||||
void* volatile r1 __attribute__((unused)) = stack_ptr[1];
|
||||
void* volatile r2 __attribute__((unused)) = stack_ptr[2];
|
||||
void* volatile r3 __attribute__((unused)) = stack_ptr[3];
|
||||
|
||||
void* volatile r12 __attribute__((unused)) = stack_ptr[4];
|
||||
void* volatile lr __attribute__((unused)) = stack_ptr[5]; // Link register
|
||||
void* volatile pc __attribute__((unused)) = stack_ptr[6]; // Program counter
|
||||
void* volatile psr __attribute__((unused)) = stack_ptr[7]; // Program status register
|
||||
|
||||
void* volatile cfsr __attribute__((unused)) = (void*)SCB->CFSR; // Configurable fault status register
|
||||
void* volatile cpacr __attribute__((unused)) = (void*)SCB->CPACR;
|
||||
void* volatile fpccr __attribute__((unused)) = (void*)FPU->FPCCR;
|
||||
|
||||
volatile bool preciserr __attribute__((unused)) = (uint32_t)cfsr & 0x200;
|
||||
volatile bool ibuserr __attribute__((unused)) = (uint32_t)cfsr & 0x100;
|
||||
|
||||
volatile int stay_looping = 1;
|
||||
while(stay_looping);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Hard fault interrupt.
|
||||
*/
|
||||
__attribute__((naked))
|
||||
void HardFault_Handler(void)
|
||||
{
|
||||
__asm(
|
||||
" tst lr, #4 \n\t"
|
||||
" ite eq \n\t"
|
||||
" mrseq r0, msp \n\t"
|
||||
" mrsne r0, psp \n\t"
|
||||
" b get_regs \n\t"
|
||||
);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Memory management fault.
|
||||
*/
|
||||
void MemManage_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 0 */
|
||||
COUNT_IRQ(MemoryManagement_IRQn);
|
||||
/* USER CODE END MemoryManagement_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */
|
||||
TIM1->BDTR &= ~(TIM_BDTR_AOE_Msk | TIM_BDTR_MOE_Msk); // disable M0 PWM
|
||||
TIM8->BDTR &= ~(TIM_BDTR_AOE_Msk | TIM_BDTR_MOE_Msk); // disable M1 PWM
|
||||
/* USER CODE END W1_MemoryManagement_IRQn 0 */
|
||||
}
|
||||
/* USER CODE BEGIN MemoryManagement_IRQn 1 */
|
||||
|
||||
/* USER CODE END MemoryManagement_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Pre-fetch fault, memory access fault.
|
||||
*/
|
||||
void BusFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN BusFault_IRQn 0 */
|
||||
COUNT_IRQ(BusFault_IRQn);
|
||||
/* USER CODE END BusFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_BusFault_IRQn 0 */
|
||||
TIM1->BDTR &= ~(TIM_BDTR_AOE_Msk | TIM_BDTR_MOE_Msk); // disable M0 PWM
|
||||
TIM8->BDTR &= ~(TIM_BDTR_AOE_Msk | TIM_BDTR_MOE_Msk); // disable M1 PWM
|
||||
/* USER CODE END W1_BusFault_IRQn 0 */
|
||||
}
|
||||
/* USER CODE BEGIN BusFault_IRQn 1 */
|
||||
|
||||
/* USER CODE END BusFault_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Undefined instruction or illegal state.
|
||||
*/
|
||||
void UsageFault_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UsageFault_IRQn 0 */
|
||||
COUNT_IRQ(UsageFault_IRQn);
|
||||
/* USER CODE END UsageFault_IRQn 0 */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE BEGIN W1_UsageFault_IRQn 0 */
|
||||
TIM1->BDTR &= ~(TIM_BDTR_AOE_Msk | TIM_BDTR_MOE_Msk); // disable M0 PWM
|
||||
TIM8->BDTR &= ~(TIM_BDTR_AOE_Msk | TIM_BDTR_MOE_Msk); // disable M1 PWM
|
||||
/* USER CODE END W1_UsageFault_IRQn 0 */
|
||||
}
|
||||
/* USER CODE BEGIN UsageFault_IRQn 1 */
|
||||
|
||||
/* USER CODE END UsageFault_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles Debug monitor.
|
||||
*/
|
||||
void DebugMon_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 0 */
|
||||
COUNT_IRQ(DebugMonitor_IRQn);
|
||||
/* USER CODE END DebugMonitor_IRQn 0 */
|
||||
/* USER CODE BEGIN DebugMonitor_IRQn 1 */
|
||||
|
||||
/* USER CODE END DebugMonitor_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles System tick timer.
|
||||
*/
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SysTick_IRQn 0 */
|
||||
COUNT_IRQ(SysTick_IRQn);
|
||||
/* USER CODE END SysTick_IRQn 0 */
|
||||
osSystickHandler();
|
||||
/* USER CODE BEGIN SysTick_IRQn 1 */
|
||||
|
||||
/* USER CODE END SysTick_IRQn 1 */
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
/* STM32F4xx Peripheral Interrupt Handlers */
|
||||
/* Add here the Interrupt Handlers for the used peripherals. */
|
||||
/* For the available peripheral interrupt handler names, */
|
||||
/* please refer to the startup file (startup_stm32f4xx.s). */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 stream0 global interrupt.
|
||||
*/
|
||||
void DMA1_Stream0_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Stream0_IRQn 0 */
|
||||
COUNT_IRQ(DMA1_Stream0_IRQn);
|
||||
/* USER CODE END DMA1_Stream0_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_spi3_rx);
|
||||
/* USER CODE BEGIN DMA1_Stream0_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Stream0_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 stream2 global interrupt.
|
||||
*/
|
||||
void DMA1_Stream2_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Stream2_IRQn 0 */
|
||||
COUNT_IRQ(DMA1_Stream2_IRQn);
|
||||
/* USER CODE END DMA1_Stream2_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_uart4_rx);
|
||||
/* USER CODE BEGIN DMA1_Stream2_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Stream2_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 stream4 global interrupt.
|
||||
*/
|
||||
void DMA1_Stream4_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Stream4_IRQn 0 */
|
||||
COUNT_IRQ(DMA1_Stream4_IRQn);
|
||||
/* USER CODE END DMA1_Stream4_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_uart4_tx);
|
||||
/* USER CODE BEGIN DMA1_Stream4_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Stream4_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 stream5 global interrupt.
|
||||
*/
|
||||
void DMA1_Stream5_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Stream5_IRQn 0 */
|
||||
COUNT_IRQ(DMA1_Stream5_IRQn);
|
||||
/* USER CODE END DMA1_Stream5_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_usart2_rx);
|
||||
/* USER CODE BEGIN DMA1_Stream5_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Stream5_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 stream6 global interrupt.
|
||||
*/
|
||||
void DMA1_Stream6_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Stream6_IRQn 0 */
|
||||
COUNT_IRQ(DMA1_Stream6_IRQn);
|
||||
/* USER CODE END DMA1_Stream6_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_usart2_tx);
|
||||
/* USER CODE BEGIN DMA1_Stream6_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Stream6_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 stream7 global interrupt.
|
||||
*/
|
||||
void DMA1_Stream7_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Stream7_IRQn 0 */
|
||||
COUNT_IRQ(DMA1_Stream7_IRQn);
|
||||
/* USER CODE END DMA1_Stream7_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_spi3_tx);
|
||||
/* USER CODE BEGIN DMA1_Stream7_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Stream7_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles CAN1 TX interrupts.
|
||||
*/
|
||||
void CAN1_TX_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_TX_IRQn 0 */
|
||||
COUNT_IRQ(CAN1_TX_IRQn);
|
||||
/* USER CODE END CAN1_TX_IRQn 0 */
|
||||
HAL_CAN_IRQHandler(&hcan1);
|
||||
/* USER CODE BEGIN CAN1_TX_IRQn 1 */
|
||||
|
||||
/* USER CODE END CAN1_TX_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles CAN1 RX0 interrupts.
|
||||
*/
|
||||
void CAN1_RX0_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_RX0_IRQn 0 */
|
||||
COUNT_IRQ(CAN1_RX0_IRQn);
|
||||
/* USER CODE END CAN1_RX0_IRQn 0 */
|
||||
HAL_CAN_IRQHandler(&hcan1);
|
||||
/* USER CODE BEGIN CAN1_RX0_IRQn 1 */
|
||||
|
||||
/* USER CODE END CAN1_RX0_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles CAN1 RX1 interrupt.
|
||||
*/
|
||||
void CAN1_RX1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_RX1_IRQn 0 */
|
||||
COUNT_IRQ(CAN1_RX1_IRQn);
|
||||
/* USER CODE END CAN1_RX1_IRQn 0 */
|
||||
HAL_CAN_IRQHandler(&hcan1);
|
||||
/* USER CODE BEGIN CAN1_RX1_IRQn 1 */
|
||||
|
||||
/* USER CODE END CAN1_RX1_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles CAN1 SCE interrupt.
|
||||
*/
|
||||
void CAN1_SCE_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN CAN1_SCE_IRQn 0 */
|
||||
COUNT_IRQ(CAN1_SCE_IRQn);
|
||||
/* USER CODE END CAN1_SCE_IRQn 0 */
|
||||
HAL_CAN_IRQHandler(&hcan1);
|
||||
/* USER CODE BEGIN CAN1_SCE_IRQn 1 */
|
||||
|
||||
/* USER CODE END CAN1_SCE_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles USART2 global interrupt.
|
||||
*/
|
||||
void USART2_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_IRQn 0 */
|
||||
|
||||
/* USER CODE END USART2_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart2);
|
||||
/* USER CODE BEGIN USART2_IRQn 1 */
|
||||
|
||||
/* USER CODE END USART2_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles TIM8 trigger and commutation interrupts and TIM14 global interrupt.
|
||||
*/
|
||||
void TIM8_TRG_COM_TIM14_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN TIM8_TRG_COM_TIM14_IRQn 0 */
|
||||
COUNT_IRQ(TIM8_TRG_COM_TIM14_IRQn);
|
||||
/* USER CODE END TIM8_TRG_COM_TIM14_IRQn 0 */
|
||||
HAL_TIM_IRQHandler(&htim8);
|
||||
HAL_TIM_IRQHandler(&htim14);
|
||||
/* USER CODE BEGIN TIM8_TRG_COM_TIM14_IRQn 1 */
|
||||
|
||||
/* USER CODE END TIM8_TRG_COM_TIM14_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles SPI3 global interrupt.
|
||||
*/
|
||||
void SPI3_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN SPI3_IRQn 0 */
|
||||
COUNT_IRQ(SPI3_IRQn);
|
||||
/* USER CODE END SPI3_IRQn 0 */
|
||||
HAL_SPI_IRQHandler(&hspi3);
|
||||
/* USER CODE BEGIN SPI3_IRQn 1 */
|
||||
|
||||
/* USER CODE END SPI3_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles UART4 global interrupt.
|
||||
*/
|
||||
void UART4_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN UART4_IRQn 0 */
|
||||
COUNT_IRQ(UART4_IRQn);
|
||||
/* USER CODE END UART4_IRQn 0 */
|
||||
HAL_UART_IRQHandler(&huart4);
|
||||
/* USER CODE BEGIN UART4_IRQn 1 */
|
||||
|
||||
/* USER CODE END UART4_IRQn 1 */
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,763 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f4xx.c
|
||||
* @author MCD Application Team
|
||||
* @version V2.6.0
|
||||
* @date 04-November-2016
|
||||
* @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f4xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f4xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
#include "stm32f4xx.h"
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
/************************* Miscellaneous Configuration ************************/
|
||||
/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
|
||||
STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* #define DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
|
||||
STM32F479xx */
|
||||
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table in
|
||||
Internal SRAM. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F4xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the FPU setting, vector table location and External memory
|
||||
* configuration.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit(void)
|
||||
{
|
||||
/* FPU settings ------------------------------------------------------------*/
|
||||
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
||||
SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */
|
||||
#endif
|
||||
/* Reset the RCC clock configuration to the default reset state ------------*/
|
||||
/* Set HSION bit */
|
||||
RCC->CR |= (uint32_t)0x00000001;
|
||||
|
||||
/* Reset CFGR register */
|
||||
RCC->CFGR = 0x00000000;
|
||||
|
||||
/* Reset HSEON, CSSON and PLLON bits */
|
||||
RCC->CR &= (uint32_t)0xFEF6FFFF;
|
||||
|
||||
/* Reset PLLCFGR register */
|
||||
RCC->PLLCFGR = 0x24003010;
|
||||
|
||||
/* Reset HSEBYP bit */
|
||||
RCC->CR &= (uint32_t)0xFFFBFFFF;
|
||||
|
||||
/* Disable all interrupts */
|
||||
RCC->CIR = 0x00000000;
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
|
||||
|
||||
/* Configure the Vector Table location add offset address ------------------*/
|
||||
#ifdef VECT_TAB_SRAM
|
||||
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
||||
#else
|
||||
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
||||
#endif
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
|
||||
* 16 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
|
||||
* depends on the application requirements), user has to ensure that HSE_VALUE
|
||||
* is same as the real frequency of the crystal used. Otherwise, this function
|
||||
* may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
*
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate(void)
|
||||
{
|
||||
uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00: /* HSI used as system clock source */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04: /* HSE used as system clock source */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08: /* PLL used as system clock source */
|
||||
|
||||
/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
|
||||
SYSCLK = PLL_VCO / PLL_P
|
||||
*/
|
||||
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
|
||||
pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
|
||||
|
||||
if (pllsource != 0)
|
||||
{
|
||||
/* HSE used as PLL clock source */
|
||||
pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* HSI used as PLL clock source */
|
||||
pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
|
||||
}
|
||||
|
||||
pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
|
||||
SystemCoreClock = pllvco/pllp;
|
||||
break;
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
/* Compute HCLK frequency --------------------------------------------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
|
||||
/* HCLK frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f4xx.s before jump to main.
|
||||
* This function configures the external memories (SRAM/SDRAM)
|
||||
* This SRAM/SDRAM will be used as program data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmp = 0x00;
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
|
||||
#if defined (DATA_IN_ExtSDRAM)
|
||||
register uint32_t tmpreg = 0, timeout = 0xFFFF;
|
||||
register __IO uint32_t index;
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x0000007D;
|
||||
#else
|
||||
/* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
|
||||
clock */
|
||||
RCC->AHB1ENR |= 0x000001F8;
|
||||
#endif /* STM32F446xx */
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
|
||||
|
||||
#if defined(STM32F446xx)
|
||||
/* Connect PAx pins to FMC Alternate function */
|
||||
GPIOA->AFR[0] |= 0xC0000000;
|
||||
GPIOA->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOA->MODER |= 0x00008000;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOA->OSPEEDR |= 0x00008000;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOA->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOA->PUPDR |= 0x00000000;
|
||||
|
||||
/* Connect PCx pins to FMC Alternate function */
|
||||
GPIOC->AFR[0] |= 0x00CC0000;
|
||||
GPIOC->AFR[1] |= 0x00000000;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOC->MODER |= 0x00000A00;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOC->OSPEEDR |= 0x00000A00;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOC->OTYPER |= 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOC->PUPDR |= 0x00000000;
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x000000CC;
|
||||
GPIOD->AFR[1] = 0xCC000CCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xA02A000A;
|
||||
/* Configure PDx pins speed to 50 MHz */
|
||||
GPIOD->OSPEEDR = 0xA02A000A;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00000CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA800A;
|
||||
/* Configure PEx pins speed to 50 MHz */
|
||||
GPIOE->OSPEEDR = 0xAAAA800A;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA800AAA;
|
||||
/* Configure PFx pins speed to 50 MHz */
|
||||
GPIOF->OSPEEDR = 0xAA800AAA;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOG->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0xAAAAAAAA;
|
||||
/* Configure PGx pins speed to 50 MHz */
|
||||
GPIOG->OSPEEDR = 0xAAAAAAAA;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Connect PHx pins to FMC Alternate function */
|
||||
GPIOH->AFR[0] = 0x00C0CC00;
|
||||
GPIOH->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PHx pins in Alternate function mode */
|
||||
GPIOH->MODER = 0xAAAA08A0;
|
||||
/* Configure PHx pins speed to 50 MHz */
|
||||
GPIOH->OSPEEDR = 0xAAAA08A0;
|
||||
/* Configure PHx pins Output type to push-pull */
|
||||
GPIOH->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PHx pins */
|
||||
GPIOH->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PIx pins to FMC Alternate function */
|
||||
GPIOI->AFR[0] = 0xCCCCCCCC;
|
||||
GPIOI->AFR[1] = 0x00000CC0;
|
||||
/* Configure PIx pins in Alternate function mode */
|
||||
GPIOI->MODER = 0x0028AAAA;
|
||||
/* Configure PIx pins speed to 50 MHz */
|
||||
GPIOI->OSPEEDR = 0x0028AAAA;
|
||||
/* Configure PIx pins Output type to push-pull */
|
||||
GPIOI->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PIx pins */
|
||||
GPIOI->PUPDR = 0x00000000;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
/*-- FMC Configuration -------------------------------------------------------*/
|
||||
/* Enable the FMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
|
||||
/* Configure and enable SDRAM bank1 */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCR[0] = 0x00001954;
|
||||
#else
|
||||
FMC_Bank5_6->SDCR[0] = 0x000019E4;
|
||||
#endif /* STM32F446xx */
|
||||
FMC_Bank5_6->SDTR[0] = 0x01115351;
|
||||
|
||||
/* SDRAM initialization sequence */
|
||||
/* Clock enable command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000011;
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Delay */
|
||||
for (index = 0; index<1000; index++);
|
||||
|
||||
/* PALL command */
|
||||
FMC_Bank5_6->SDCMR = 0x00000012;
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Auto refresh command */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x000000F3;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00000073;
|
||||
#endif /* STM32F446xx */
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* MRD register program */
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDCMR = 0x00044014;
|
||||
#else
|
||||
FMC_Bank5_6->SDCMR = 0x00046014;
|
||||
#endif /* STM32F446xx */
|
||||
timeout = 0xFFFF;
|
||||
while((tmpreg != 0) && (timeout-- > 0))
|
||||
{
|
||||
tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
|
||||
}
|
||||
|
||||
/* Set refresh count */
|
||||
tmpreg = FMC_Bank5_6->SDRTR;
|
||||
#if defined(STM32F446xx)
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
|
||||
#else
|
||||
FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
|
||||
#endif /* STM32F446xx */
|
||||
|
||||
/* Disable write protection */
|
||||
tmpreg = FMC_Bank5_6->SDCR[0];
|
||||
FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
|
||||
#endif /* DATA_IN_ExtSDRAM */
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
||||
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
|
||||
|| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
|
||||
|| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
|
||||
#if defined(DATA_IN_ExtSRAM)
|
||||
/*-- GPIOs Configuration -----------------------------------------------------*/
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
|
||||
RCC->AHB1ENR |= 0x00000078;
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
|
||||
|
||||
/* Connect PDx pins to FMC Alternate function */
|
||||
GPIOD->AFR[0] = 0x00CCC0CC;
|
||||
GPIOD->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PDx pins in Alternate function mode */
|
||||
GPIOD->MODER = 0xAAAA0A8A;
|
||||
/* Configure PDx pins speed to 100 MHz */
|
||||
GPIOD->OSPEEDR = 0xFFFF0FCF;
|
||||
/* Configure PDx pins Output type to push-pull */
|
||||
GPIOD->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PDx pins */
|
||||
GPIOD->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PEx pins to FMC Alternate function */
|
||||
GPIOE->AFR[0] = 0xC00CC0CC;
|
||||
GPIOE->AFR[1] = 0xCCCCCCCC;
|
||||
/* Configure PEx pins in Alternate function mode */
|
||||
GPIOE->MODER = 0xAAAA828A;
|
||||
/* Configure PEx pins speed to 100 MHz */
|
||||
GPIOE->OSPEEDR = 0xFFFFC3CF;
|
||||
/* Configure PEx pins Output type to push-pull */
|
||||
GPIOE->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PEx pins */
|
||||
GPIOE->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PFx pins to FMC Alternate function */
|
||||
GPIOF->AFR[0] = 0x00CCCCCC;
|
||||
GPIOF->AFR[1] = 0xCCCC0000;
|
||||
/* Configure PFx pins in Alternate function mode */
|
||||
GPIOF->MODER = 0xAA000AAA;
|
||||
/* Configure PFx pins speed to 100 MHz */
|
||||
GPIOF->OSPEEDR = 0xFF000FFF;
|
||||
/* Configure PFx pins Output type to push-pull */
|
||||
GPIOF->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PFx pins */
|
||||
GPIOF->PUPDR = 0x00000000;
|
||||
|
||||
/* Connect PGx pins to FMC Alternate function */
|
||||
GPIOG->AFR[0] = 0x00CCCCCC;
|
||||
GPIOG->AFR[1] = 0x000000C0;
|
||||
/* Configure PGx pins in Alternate function mode */
|
||||
GPIOG->MODER = 0x00085AAA;
|
||||
/* Configure PGx pins speed to 100 MHz */
|
||||
GPIOG->OSPEEDR = 0x000CAFFF;
|
||||
/* Configure PGx pins Output type to push-pull */
|
||||
GPIOG->OTYPER = 0x00000000;
|
||||
/* No pull-up, pull-down for PGx pins */
|
||||
GPIOG->PUPDR = 0x00000000;
|
||||
|
||||
/*-- FMC/FSMC Configuration --------------------------------------------------*/
|
||||
/* Enable the FMC/FSMC interface clock */
|
||||
RCC->AHB3ENR |= 0x00000001;
|
||||
|
||||
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
|
||||
#if defined(STM32F469xx) || defined(STM32F479xx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FMC_Bank1->BTCR[2] = 0x00001091;
|
||||
FMC_Bank1->BTCR[3] = 0x00110212;
|
||||
FMC_Bank1E->BWTR[2] = 0x0fffffff;
|
||||
#endif /* STM32F469xx || STM32F479xx */
|
||||
#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
|
||||
|| defined(STM32F412Zx) || defined(STM32F412Vx)
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
|
||||
/* Configure and enable Bank1_SRAM2 */
|
||||
FSMC_Bank1->BTCR[2] = 0x00001011;
|
||||
FSMC_Bank1->BTCR[3] = 0x00000201;
|
||||
FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
|
||||
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
|
||||
STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx */
|
||||
(void)(tmp);
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,729 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : TIM.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the TIM instances.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "tim.h"
|
||||
|
||||
#include "gpio.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
TIM_HandleTypeDef htim1;
|
||||
TIM_HandleTypeDef htim2;
|
||||
TIM_HandleTypeDef htim3;
|
||||
TIM_HandleTypeDef htim4;
|
||||
TIM_HandleTypeDef htim5;
|
||||
TIM_HandleTypeDef htim8;
|
||||
TIM_HandleTypeDef htim13;
|
||||
|
||||
/* TIM1 init function */
|
||||
void MX_TIM1_Init(void)
|
||||
{
|
||||
TIM_ClockConfigTypeDef sClockSourceConfig;
|
||||
TIM_MasterConfigTypeDef sMasterConfig;
|
||||
TIM_OC_InitTypeDef sConfigOC;
|
||||
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig;
|
||||
|
||||
htim1.Instance = TIM1;
|
||||
htim1.Init.Prescaler = 0;
|
||||
htim1.Init.CounterMode = TIM_COUNTERMODE_CENTERALIGNED3;
|
||||
htim1.Init.Period = TIM_1_8_PERIOD_CLOCKS;
|
||||
htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim1.Init.RepetitionCounter = TIM_1_8_RCR;
|
||||
if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
|
||||
if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
if (HAL_TIM_OC_Init(&htim1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM2;
|
||||
sConfigOC.Pulse = 0;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
||||
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sConfigOC.OCMode = TIM_OCMODE_TIMING;
|
||||
if (HAL_TIM_OC_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_ENABLE;
|
||||
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_ENABLE;
|
||||
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
|
||||
sBreakDeadTimeConfig.DeadTime = TIM_1_8_DEADTIME_CLOCKS;
|
||||
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
|
||||
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
|
||||
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
|
||||
if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
HAL_TIM_MspPostInit(&htim1);
|
||||
|
||||
}
|
||||
/* TIM2 init function */
|
||||
void MX_TIM2_Init(void)
|
||||
{
|
||||
TIM_MasterConfigTypeDef sMasterConfig;
|
||||
TIM_OC_InitTypeDef sConfigOC;
|
||||
|
||||
htim2.Instance = TIM2;
|
||||
htim2.Init.Prescaler = 0;
|
||||
htim2.Init.CounterMode = TIM_COUNTERMODE_CENTERALIGNED3;
|
||||
htim2.Init.Period = TIM_APB1_PERIOD_CLOCKS;
|
||||
htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
if (HAL_TIM_PWM_Init(&htim2) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM2;
|
||||
sConfigOC.Pulse = 0;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_LOW;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sConfigOC.Pulse = TIM_APB1_PERIOD_CLOCKS+1;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
HAL_TIM_MspPostInit(&htim2);
|
||||
|
||||
}
|
||||
/* TIM3 init function */
|
||||
void MX_TIM3_Init(void)
|
||||
{
|
||||
TIM_Encoder_InitTypeDef sConfig;
|
||||
TIM_MasterConfigTypeDef sMasterConfig;
|
||||
|
||||
htim3.Instance = TIM3;
|
||||
htim3.Init.Prescaler = 0;
|
||||
htim3.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim3.Init.Period = 0xffff;
|
||||
htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
sConfig.EncoderMode = TIM_ENCODERMODE_TI12;
|
||||
sConfig.IC1Polarity = TIM_ICPOLARITY_RISING;
|
||||
sConfig.IC1Selection = TIM_ICSELECTION_DIRECTTI;
|
||||
sConfig.IC1Prescaler = TIM_ICPSC_DIV1;
|
||||
sConfig.IC1Filter = 4;
|
||||
sConfig.IC2Polarity = TIM_ICPOLARITY_RISING;
|
||||
sConfig.IC2Selection = TIM_ICSELECTION_DIRECTTI;
|
||||
sConfig.IC2Prescaler = TIM_ICPSC_DIV1;
|
||||
sConfig.IC2Filter = 4;
|
||||
if (HAL_TIM_Encoder_Init(&htim3, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* TIM4 init function */
|
||||
void MX_TIM4_Init(void)
|
||||
{
|
||||
TIM_Encoder_InitTypeDef sConfig;
|
||||
TIM_MasterConfigTypeDef sMasterConfig;
|
||||
|
||||
htim4.Instance = TIM4;
|
||||
htim4.Init.Prescaler = 0;
|
||||
htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim4.Init.Period = 0xffff;
|
||||
htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
sConfig.EncoderMode = TIM_ENCODERMODE_TI12;
|
||||
sConfig.IC1Polarity = TIM_ICPOLARITY_RISING;
|
||||
sConfig.IC1Selection = TIM_ICSELECTION_DIRECTTI;
|
||||
sConfig.IC1Prescaler = TIM_ICPSC_DIV1;
|
||||
sConfig.IC1Filter = 4;
|
||||
sConfig.IC2Polarity = TIM_ICPOLARITY_RISING;
|
||||
sConfig.IC2Selection = TIM_ICSELECTION_DIRECTTI;
|
||||
sConfig.IC2Prescaler = TIM_ICPSC_DIV1;
|
||||
sConfig.IC2Filter = 4;
|
||||
if (HAL_TIM_Encoder_Init(&htim4, &sConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* TIM5 init function */
|
||||
void MX_TIM5_Init(void)
|
||||
{
|
||||
TIM_MasterConfigTypeDef sMasterConfig;
|
||||
TIM_IC_InitTypeDef sConfigIC;
|
||||
|
||||
htim5.Instance = TIM5;
|
||||
htim5.Init.Prescaler = 0;
|
||||
htim5.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim5.Init.Period = 0xFFFFFFFF;
|
||||
htim5.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
if (HAL_TIM_IC_Init(&htim5) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim5, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sConfigIC.ICPolarity = TIM_INPUTCHANNELPOLARITY_BOTHEDGE;
|
||||
sConfigIC.ICSelection = TIM_ICSELECTION_DIRECTTI;
|
||||
sConfigIC.ICPrescaler = TIM_ICPSC_DIV1;
|
||||
sConfigIC.ICFilter = 15;
|
||||
if (HAL_TIM_IC_ConfigChannel(&htim5, &sConfigIC, TIM_CHANNEL_3) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
if (HAL_TIM_IC_ConfigChannel(&htim5, &sConfigIC, TIM_CHANNEL_4) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* TIM8 init function */
|
||||
void MX_TIM8_Init(void)
|
||||
{
|
||||
TIM_MasterConfigTypeDef sMasterConfig;
|
||||
TIM_OC_InitTypeDef sConfigOC;
|
||||
TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig;
|
||||
|
||||
htim8.Instance = TIM8;
|
||||
htim8.Init.Prescaler = 0;
|
||||
htim8.Init.CounterMode = TIM_COUNTERMODE_CENTERALIGNED3;
|
||||
htim8.Init.Period = TIM_1_8_PERIOD_CLOCKS;
|
||||
htim8.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
htim8.Init.RepetitionCounter = TIM_1_8_RCR;
|
||||
if (HAL_TIM_PWM_Init(&htim8) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sMasterConfig.MasterOutputTrigger = TIM_TRGO_UPDATE;
|
||||
sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
|
||||
if (HAL_TIMEx_MasterConfigSynchronization(&htim8, &sMasterConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sConfigOC.OCMode = TIM_OCMODE_PWM2;
|
||||
sConfigOC.Pulse = 0;
|
||||
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
|
||||
sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
|
||||
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
|
||||
sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
|
||||
sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_ENABLE;
|
||||
sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_ENABLE;
|
||||
sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
|
||||
sBreakDeadTimeConfig.DeadTime = TIM_1_8_DEADTIME_CLOCKS;
|
||||
sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
|
||||
sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
|
||||
sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
|
||||
if (HAL_TIMEx_ConfigBreakDeadTime(&htim8, &sBreakDeadTimeConfig) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
HAL_TIM_MspPostInit(&htim8);
|
||||
|
||||
}
|
||||
/* TIM13 init function */
|
||||
void MX_TIM13_Init(void)
|
||||
{
|
||||
|
||||
htim13.Instance = TIM13;
|
||||
htim13.Init.Prescaler = 0;
|
||||
htim13.Init.CounterMode = TIM_COUNTERMODE_UP;
|
||||
htim13.Init.Period = (2 * TIM_1_8_PERIOD_CLOCKS * (TIM_1_8_RCR+1)) * ((float)TIM_APB1_CLOCK_HZ / (float)TIM_1_8_CLOCK_HZ) - 1;
|
||||
htim13.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
|
||||
if (HAL_TIM_Base_Init(&htim13) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
{
|
||||
|
||||
if(tim_baseHandle->Instance==TIM1)
|
||||
{
|
||||
/* USER CODE BEGIN TIM1_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM1_MspInit 0 */
|
||||
/* TIM1 clock enable */
|
||||
__HAL_RCC_TIM1_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM1_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM1_MspInit 1 */
|
||||
}
|
||||
else if(tim_baseHandle->Instance==TIM13)
|
||||
{
|
||||
/* USER CODE BEGIN TIM13_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM13_MspInit 0 */
|
||||
/* TIM13 clock enable */
|
||||
__HAL_RCC_TIM13_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM13_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM13_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* tim_pwmHandle)
|
||||
{
|
||||
|
||||
if(tim_pwmHandle->Instance==TIM2)
|
||||
{
|
||||
/* USER CODE BEGIN TIM2_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM2_MspInit 0 */
|
||||
/* TIM2 clock enable */
|
||||
__HAL_RCC_TIM2_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM2_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM2_MspInit 1 */
|
||||
}
|
||||
else if(tim_pwmHandle->Instance==TIM8)
|
||||
{
|
||||
/* USER CODE BEGIN TIM8_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM8_MspInit 0 */
|
||||
/* TIM8 clock enable */
|
||||
__HAL_RCC_TIM8_CLK_ENABLE();
|
||||
/* USER CODE BEGIN TIM8_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM8_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef* tim_encoderHandle)
|
||||
{
|
||||
|
||||
if(tim_encoderHandle->Instance==TIM3)
|
||||
{
|
||||
/* USER CODE BEGIN TIM3_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM3_MspInit 0 */
|
||||
/* TIM3 clock enable */
|
||||
__HAL_RCC_TIM3_CLK_ENABLE();
|
||||
|
||||
/* USER CODE BEGIN TIM3_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM3_MspInit 1 */
|
||||
}
|
||||
else if(tim_encoderHandle->Instance==TIM4)
|
||||
{
|
||||
/* USER CODE BEGIN TIM4_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM4_MspInit 0 */
|
||||
/* TIM4 clock enable */
|
||||
__HAL_RCC_TIM4_CLK_ENABLE();
|
||||
|
||||
/* USER CODE BEGIN TIM4_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM4_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_IC_MspInit(TIM_HandleTypeDef* tim_icHandle)
|
||||
{
|
||||
|
||||
if(tim_icHandle->Instance==TIM5)
|
||||
{
|
||||
/* USER CODE BEGIN TIM5_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM5_MspInit 0 */
|
||||
/* TIM5 clock enable */
|
||||
__HAL_RCC_TIM5_CLK_ENABLE();
|
||||
|
||||
/* TIM5 interrupt Init */
|
||||
HAL_NVIC_SetPriority(TIM5_IRQn, 1, 0);
|
||||
HAL_NVIC_EnableIRQ(TIM5_IRQn);
|
||||
/* USER CODE BEGIN TIM5_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM5_MspInit 1 */
|
||||
}
|
||||
}
|
||||
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* timHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(timHandle->Instance==TIM1)
|
||||
{
|
||||
/* USER CODE BEGIN TIM1_MspPostInit 0 */
|
||||
|
||||
/* USER CODE END TIM1_MspPostInit 0 */
|
||||
/**TIM1 GPIO Configuration
|
||||
PB13 ------> TIM1_CH1N
|
||||
PB14 ------> TIM1_CH2N
|
||||
PB15 ------> TIM1_CH3N
|
||||
PA8 ------> TIM1_CH1
|
||||
PA9 ------> TIM1_CH2
|
||||
PA10 ------> TIM1_CH3
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M0_AL_Pin|M0_BL_Pin|M0_CL_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = M0_AH_Pin|M0_BH_Pin|M0_CH_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN TIM1_MspPostInit 1 */
|
||||
|
||||
/* USER CODE END TIM1_MspPostInit 1 */
|
||||
}
|
||||
else if(timHandle->Instance==TIM2)
|
||||
{
|
||||
/* USER CODE BEGIN TIM2_MspPostInit 0 */
|
||||
|
||||
/* USER CODE END TIM2_MspPostInit 0 */
|
||||
|
||||
/**TIM2 GPIO Configuration
|
||||
PB10 ------> TIM2_CH3
|
||||
PB11 ------> TIM2_CH4
|
||||
*/
|
||||
GPIO_InitStruct.Pin = AUX_L_Pin|AUX_H_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN TIM2_MspPostInit 1 */
|
||||
|
||||
/* USER CODE END TIM2_MspPostInit 1 */
|
||||
}
|
||||
else if(timHandle->Instance==TIM8)
|
||||
{
|
||||
/* USER CODE BEGIN TIM8_MspPostInit 0 */
|
||||
|
||||
/* USER CODE END TIM8_MspPostInit 0 */
|
||||
|
||||
/**TIM8 GPIO Configuration
|
||||
PA7 ------> TIM8_CH1N
|
||||
PB0 ------> TIM8_CH2N
|
||||
PB1 ------> TIM8_CH3N
|
||||
PC6 ------> TIM8_CH1
|
||||
PC7 ------> TIM8_CH2
|
||||
PC8 ------> TIM8_CH3
|
||||
*/
|
||||
GPIO_InitStruct.Pin = M1_AL_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF3_TIM8;
|
||||
HAL_GPIO_Init(M1_AL_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = M1_BL_Pin|M1_CL_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF3_TIM8;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = M1_AH_Pin|M1_BH_Pin|M1_CH_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF3_TIM8;
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN TIM8_MspPostInit 1 */
|
||||
|
||||
/* USER CODE END TIM8_MspPostInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle)
|
||||
{
|
||||
|
||||
if(tim_baseHandle->Instance==TIM1)
|
||||
{
|
||||
/* USER CODE BEGIN TIM1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM1_CLK_DISABLE();
|
||||
|
||||
/* TIM1 interrupt Deinit */
|
||||
/* USER CODE BEGIN TIM1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM1_MspDeInit 1 */
|
||||
}
|
||||
else if(tim_baseHandle->Instance==TIM13)
|
||||
{
|
||||
/* USER CODE BEGIN TIM13_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM13_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM13_CLK_DISABLE();
|
||||
|
||||
/* TIM13 interrupt Deinit */
|
||||
/* USER CODE BEGIN TIM13:TIM8_UP_TIM13_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "TIM8_UP_TIM13_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(TIM8_UP_TIM13_IRQn); */
|
||||
/* USER CODE END TIM13:TIM8_UP_TIM13_IRQn disable */
|
||||
|
||||
/* USER CODE BEGIN TIM13_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM13_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* tim_pwmHandle)
|
||||
{
|
||||
|
||||
if(tim_pwmHandle->Instance==TIM2)
|
||||
{
|
||||
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM2_CLK_DISABLE();
|
||||
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM2_MspDeInit 1 */
|
||||
}
|
||||
else if(tim_pwmHandle->Instance==TIM8)
|
||||
{
|
||||
/* USER CODE BEGIN TIM8_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM8_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM8_CLK_DISABLE();
|
||||
|
||||
/* TIM8 interrupt Deinit */
|
||||
/* USER CODE BEGIN TIM8:TIM8_UP_TIM13_IRQn disable */
|
||||
/**
|
||||
* Uncomment the line below to disable the "TIM8_UP_TIM13_IRQn" interrupt
|
||||
* Be aware, disabling shared interrupt may affect other IPs
|
||||
*/
|
||||
/* HAL_NVIC_DisableIRQ(TIM8_UP_TIM13_IRQn); */
|
||||
/* USER CODE END TIM8:TIM8_UP_TIM13_IRQn disable */
|
||||
/* USER CODE BEGIN TIM8_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM8_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef* tim_encoderHandle)
|
||||
{
|
||||
|
||||
if(tim_encoderHandle->Instance==TIM3)
|
||||
{
|
||||
/* USER CODE BEGIN TIM3_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM3_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM3_CLK_DISABLE();
|
||||
|
||||
/**TIM3 GPIO Configuration
|
||||
PB4 ------> TIM3_CH1
|
||||
PB5 ------> TIM3_CH2
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, M0_ENC_A_Pin|M0_ENC_B_Pin);
|
||||
|
||||
/* USER CODE BEGIN TIM3_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM3_MspDeInit 1 */
|
||||
}
|
||||
else if(tim_encoderHandle->Instance==TIM4)
|
||||
{
|
||||
/* USER CODE BEGIN TIM4_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM4_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM4_CLK_DISABLE();
|
||||
|
||||
/**TIM4 GPIO Configuration
|
||||
PB6 ------> TIM4_CH1
|
||||
PB7 ------> TIM4_CH2
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, M1_ENC_A_Pin|M1_ENC_B_Pin);
|
||||
|
||||
/* USER CODE BEGIN TIM4_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM4_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef* tim_icHandle)
|
||||
{
|
||||
|
||||
if(tim_icHandle->Instance==TIM5)
|
||||
{
|
||||
/* USER CODE BEGIN TIM5_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM5_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM5_CLK_DISABLE();
|
||||
|
||||
/**TIM5 GPIO Configuration
|
||||
PA2 ------> TIM5_CH3
|
||||
PA3 ------> TIM5_CH4
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_3_Pin|GPIO_4_Pin);
|
||||
|
||||
/* TIM5 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(TIM5_IRQn);
|
||||
/* USER CODE BEGIN TIM5_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM5_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,267 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : USART.c
|
||||
* Description : This file provides code for the configuration
|
||||
* of the USART instances.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usart.h"
|
||||
|
||||
#include "gpio.h"
|
||||
#include "dma.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
UART_HandleTypeDef huart4;
|
||||
UART_HandleTypeDef huart2;
|
||||
DMA_HandleTypeDef hdma_uart4_rx;
|
||||
DMA_HandleTypeDef hdma_uart4_tx;
|
||||
DMA_HandleTypeDef hdma_usart2_rx;
|
||||
DMA_HandleTypeDef hdma_usart2_tx;
|
||||
|
||||
/* UART4 init function */
|
||||
void MX_UART4_Init(void)
|
||||
{
|
||||
|
||||
huart4.Instance = UART4;
|
||||
//huart4.Init.BaudRate = 115200; // Provisionally this can be changed to 921600 for faster transfers, the low power Arduinos will not keep up.
|
||||
huart4.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart4.Init.StopBits = UART_STOPBITS_1;
|
||||
huart4.Init.Parity = UART_PARITY_NONE;
|
||||
huart4.Init.Mode = UART_MODE_TX_RX;
|
||||
huart4.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart4.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart4) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
}
|
||||
/* USART2 init function */
|
||||
|
||||
void MX_USART2_UART_Init(void)
|
||||
{
|
||||
|
||||
huart2.Instance = USART2;
|
||||
//huart2.Init.BaudRate = 115200;
|
||||
huart2.Init.WordLength = UART_WORDLENGTH_8B;
|
||||
huart2.Init.StopBits = UART_STOPBITS_1;
|
||||
huart2.Init.Parity = UART_PARITY_NONE;
|
||||
huart2.Init.Mode = UART_MODE_TX_RX;
|
||||
huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
||||
huart2.Init.OverSampling = UART_OVERSAMPLING_16;
|
||||
if (HAL_UART_Init(&huart2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
if(uartHandle->Instance==UART4)
|
||||
{
|
||||
/* USER CODE BEGIN UART4_MspInit 0 */
|
||||
|
||||
/* USER CODE END UART4_MspInit 0 */
|
||||
/* UART4 clock enable */
|
||||
__HAL_RCC_UART4_CLK_ENABLE();
|
||||
|
||||
/* UART4 DMA Init */
|
||||
/* UART4_RX Init */
|
||||
hdma_uart4_rx.Instance = DMA1_Stream2;
|
||||
hdma_uart4_rx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_uart4_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_uart4_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_uart4_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_uart4_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_uart4_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_uart4_rx.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_uart4_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_uart4_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_uart4_rx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmarx,hdma_uart4_rx);
|
||||
|
||||
/* UART4_TX Init */
|
||||
hdma_uart4_tx.Instance = DMA1_Stream4;
|
||||
hdma_uart4_tx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_uart4_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_uart4_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_uart4_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_uart4_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_uart4_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_uart4_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_uart4_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_uart4_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_uart4_tx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmatx,hdma_uart4_tx);
|
||||
|
||||
/* UART4 interrupt Init */
|
||||
HAL_NVIC_SetPriority(UART4_IRQn, 10, 0);
|
||||
HAL_NVIC_EnableIRQ(UART4_IRQn);
|
||||
/* USER CODE BEGIN UART4_MspInit 1 */
|
||||
|
||||
/* USER CODE END UART4_MspInit 1 */
|
||||
}
|
||||
else if(uartHandle->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 0 */
|
||||
/* USART2 clock enable */
|
||||
__HAL_RCC_USART2_CLK_ENABLE();
|
||||
|
||||
/* USART2 DMA Init */
|
||||
/* USART2_RX Init */
|
||||
hdma_usart2_rx.Instance = DMA1_Stream5;
|
||||
hdma_usart2_rx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_usart2_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
||||
hdma_usart2_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_usart2_rx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_usart2_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_usart2_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_usart2_rx.Init.Mode = DMA_CIRCULAR;
|
||||
hdma_usart2_rx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_usart2_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_usart2_rx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmarx,hdma_usart2_rx);
|
||||
|
||||
/* USART2_TX Init */
|
||||
hdma_usart2_tx.Instance = DMA1_Stream6;
|
||||
hdma_usart2_tx.Init.Channel = DMA_CHANNEL_4;
|
||||
hdma_usart2_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_usart2_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_usart2_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_usart2_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_usart2_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_usart2_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_usart2_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
hdma_usart2_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
||||
if (HAL_DMA_Init(&hdma_usart2_tx) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
__HAL_LINKDMA(uartHandle,hdmatx,hdma_usart2_tx);
|
||||
|
||||
/* USART2 interrupt Init */
|
||||
HAL_NVIC_SetPriority(USART2_IRQn, 10, 0);
|
||||
HAL_NVIC_EnableIRQ(USART2_IRQn);
|
||||
/* USER CODE BEGIN USART2_MspInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_UART_MspDeInit(UART_HandleTypeDef* uartHandle)
|
||||
{
|
||||
|
||||
if(uartHandle->Instance==UART4)
|
||||
{
|
||||
/* USER CODE BEGIN UART4_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END UART4_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_UART4_CLK_DISABLE();
|
||||
|
||||
/* UART4 DMA DeInit */
|
||||
HAL_DMA_DeInit(uartHandle->hdmarx);
|
||||
HAL_DMA_DeInit(uartHandle->hdmatx);
|
||||
|
||||
/* UART4 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(UART4_IRQn);
|
||||
/* USER CODE BEGIN UART4_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END UART4_MspDeInit 1 */
|
||||
}
|
||||
else if(uartHandle->Instance==USART2)
|
||||
{
|
||||
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USART2_CLK_DISABLE();
|
||||
|
||||
/* USART2 DMA DeInit */
|
||||
HAL_DMA_DeInit(uartHandle->hdmarx);
|
||||
HAL_DMA_DeInit(uartHandle->hdmatx);
|
||||
|
||||
/* USART2 interrupt Deinit */
|
||||
HAL_NVIC_DisableIRQ(USART2_IRQn);
|
||||
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USART2_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,121 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usb_device.c
|
||||
* @version : v1.0_Cube
|
||||
* @brief : This file implements the USB Device
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
|
||||
#include "usb_device.h"
|
||||
#include "usbd_core.h"
|
||||
#include "usbd_desc.h"
|
||||
#include "usbd_cdc.h"
|
||||
#include "usbd_cdc_if.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/* USER CODE BEGIN PFP */
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* USB Device Core handle declaration. */
|
||||
USBD_HandleTypeDef hUsbDeviceFS;
|
||||
|
||||
/*
|
||||
* -- Insert your variables declaration here --
|
||||
*/
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/*
|
||||
* -- Insert your external function declaration here --
|
||||
*/
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/**
|
||||
* Init USB device Library, add supported class and start the library
|
||||
* @retval None
|
||||
*/
|
||||
void MX_USB_DEVICE_Init(void)
|
||||
{
|
||||
/* USER CODE BEGIN USB_DEVICE_Init_PreTreatment */
|
||||
|
||||
/* USER CODE END USB_DEVICE_Init_PreTreatment */
|
||||
|
||||
/* Init Device Library, add supported class and start the library. */
|
||||
USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS);
|
||||
|
||||
USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC);
|
||||
|
||||
USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS);
|
||||
|
||||
USBD_Start(&hUsbDeviceFS);
|
||||
|
||||
/* USER CODE BEGIN USB_DEVICE_Init_PostTreatment */
|
||||
|
||||
/* USER CODE END USB_DEVICE_Init_PostTreatment */
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,343 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_cdc_if.c
|
||||
* @version : v1.0_Cube
|
||||
* @brief : Usb device for Virtual Com Port.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usbd_cdc_if.h"
|
||||
|
||||
/* USER CODE BEGIN INCLUDE */
|
||||
#include "cmsis_os.h"
|
||||
#include <communication/interface_usb.h>
|
||||
#include <freertos_vars.h>
|
||||
/* USER CODE END INCLUDE */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @brief Usb device library.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup USBD_CDC_IF
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Private_TypesDefinitions USBD_CDC_IF_Private_TypesDefinitions
|
||||
* @brief Private types.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_TYPES */
|
||||
/* USER CODE END PRIVATE_TYPES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Private_Defines USBD_CDC_IF_Private_Defines
|
||||
* @brief Private defines.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_DEFINES */
|
||||
/* USER CODE END PRIVATE_DEFINES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Private_Macros USBD_CDC_IF_Private_Macros
|
||||
* @brief Private macros.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_MACRO */
|
||||
/* USER CODE END PRIVATE_MACRO */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Private_Variables USBD_CDC_IF_Private_Variables
|
||||
* @brief Private variables.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_VARIABLES */
|
||||
/* USER CODE END PRIVATE_VARIABLES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Exported_Variables USBD_CDC_IF_Exported_Variables
|
||||
* @brief Public variables.
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern USBD_HandleTypeDef hUsbDeviceFS;
|
||||
|
||||
/* USER CODE BEGIN EXPORTED_VARIABLES */
|
||||
/* USER CODE END EXPORTED_VARIABLES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_CDC_IF_Private_FunctionPrototypes USBD_CDC_IF_Private_FunctionPrototypes
|
||||
* @brief Private functions declaration.
|
||||
* @{
|
||||
*/
|
||||
|
||||
static int8_t CDC_Init_FS(void);
|
||||
static int8_t CDC_DeInit_FS(void);
|
||||
static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length);
|
||||
static int8_t CDC_Receive_FS(uint8_t* pbuf, uint32_t *Len, uint8_t endpoint_pair);
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
|
||||
/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
USBD_CDC_ItfTypeDef USBD_Interface_fops_FS =
|
||||
{
|
||||
CDC_Init_FS,
|
||||
CDC_DeInit_FS,
|
||||
CDC_Control_FS,
|
||||
CDC_Receive_FS
|
||||
};
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Initializes the CDC media low layer over the FS USB IP
|
||||
* @retval USBD_OK if all operations are OK else USBD_FAIL
|
||||
*/
|
||||
static int8_t CDC_Init_FS(void)
|
||||
{
|
||||
/* USER CODE BEGIN 3 */
|
||||
/* Set Application Buffers */
|
||||
osMessagePut(usb_event_queue, 1, 0);
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief DeInitializes the CDC media low layer
|
||||
* @retval USBD_OK if all operations are OK else USBD_FAIL
|
||||
*/
|
||||
static int8_t CDC_DeInit_FS(void)
|
||||
{
|
||||
/* USER CODE BEGIN 4 */
|
||||
osMessagePut(usb_event_queue, 2, 0);
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 4 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Manage the CDC class requests
|
||||
* @param cmd: Command code
|
||||
* @param pbuf: Buffer containing command data (request parameters)
|
||||
* @param length: Number of data to be sent (in bytes)
|
||||
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||
*/
|
||||
static int8_t CDC_Control_FS(uint8_t cmd, uint8_t* pbuf, uint16_t length)
|
||||
{
|
||||
/* USER CODE BEGIN 5 */
|
||||
switch (cmd)
|
||||
{
|
||||
case CDC_SEND_ENCAPSULATED_COMMAND:
|
||||
|
||||
break;
|
||||
|
||||
case CDC_GET_ENCAPSULATED_RESPONSE:
|
||||
|
||||
break;
|
||||
|
||||
case CDC_SET_COMM_FEATURE:
|
||||
|
||||
break;
|
||||
|
||||
case CDC_GET_COMM_FEATURE:
|
||||
|
||||
break;
|
||||
|
||||
case CDC_CLEAR_COMM_FEATURE:
|
||||
|
||||
break;
|
||||
|
||||
/*******************************************************************************/
|
||||
/* Line Coding Structure */
|
||||
/*-----------------------------------------------------------------------------*/
|
||||
/* Offset | Field | Size | Value | Description */
|
||||
/* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/
|
||||
/* 4 | bCharFormat | 1 | Number | Stop bits */
|
||||
/* 0 - 1 Stop bit */
|
||||
/* 1 - 1.5 Stop bits */
|
||||
/* 2 - 2 Stop bits */
|
||||
/* 5 | bParityType | 1 | Number | Parity */
|
||||
/* 0 - None */
|
||||
/* 1 - Odd */
|
||||
/* 2 - Even */
|
||||
/* 3 - Mark */
|
||||
/* 4 - Space */
|
||||
/* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */
|
||||
/*******************************************************************************/
|
||||
case CDC_SET_LINE_CODING:
|
||||
|
||||
break;
|
||||
|
||||
case CDC_GET_LINE_CODING:
|
||||
pbuf[0] = (uint8_t)(115200);
|
||||
pbuf[1] = (uint8_t)(115200 >> 8);
|
||||
pbuf[2] = (uint8_t)(115200 >> 16);
|
||||
pbuf[3] = (uint8_t)(115200 >> 24);
|
||||
pbuf[4] = 0; // stop bits (1)
|
||||
pbuf[5] = 0; // parity (none)
|
||||
pbuf[6] = 8; // number of bits (8)
|
||||
break;
|
||||
|
||||
case CDC_SET_CONTROL_LINE_STATE:
|
||||
|
||||
break;
|
||||
|
||||
case CDC_SEND_BREAK:
|
||||
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 5 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Data received over USB OUT endpoint are sent over CDC interface
|
||||
* through this function.
|
||||
*
|
||||
* @note
|
||||
* This function will block any OUT packet reception on USB endpoint
|
||||
* untill exiting this function. If you exit this function before transfer
|
||||
* is complete on CDC interface (ie. using DMA controller) it will result
|
||||
* in receiving more data while previous ones are still not sent.
|
||||
*
|
||||
* @param Buf: Buffer of data to be received
|
||||
* @param Len: Number of data received (in bytes)
|
||||
* @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL
|
||||
*/
|
||||
static int8_t CDC_Receive_FS(uint8_t* Buf, uint32_t *Len, uint8_t endpoint_pair)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
usb_rx_process_packet(Buf, *Len, endpoint_pair);
|
||||
|
||||
return (USBD_OK);
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CDC_Transmit_FS
|
||||
* Data to send over USB IN endpoint are sent over CDC interface
|
||||
* through this function.
|
||||
* @note
|
||||
*
|
||||
*
|
||||
* @param Buf: Buffer of data to be sent
|
||||
* @param Len: Number of data to be sent (in bytes)
|
||||
* @retval USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY
|
||||
*/
|
||||
uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len, uint8_t endpoint_pair)
|
||||
{
|
||||
uint8_t result = USBD_OK;
|
||||
/* USER CODE BEGIN 7 */
|
||||
//Check length
|
||||
if (Len > USB_TX_DATA_SIZE)
|
||||
return USBD_FAIL;
|
||||
|
||||
USBD_CDC_HandleTypeDef* hcdc = (USBD_CDC_HandleTypeDef*) hUsbDeviceFS.pClassData;
|
||||
|
||||
// Select EP
|
||||
USBD_CDC_EP_HandleTypeDef* hEP_Tx;
|
||||
if (endpoint_pair == CDC_IN_EP) {
|
||||
hEP_Tx = &hcdc->CDC_Tx;
|
||||
} else if (endpoint_pair == ODRIVE_IN_EP) {
|
||||
hEP_Tx = &hcdc->ODRIVE_Tx;
|
||||
} else {
|
||||
return USBD_FAIL;
|
||||
}
|
||||
|
||||
// Check for ongoing transmission
|
||||
if (hEP_Tx->State != 0)
|
||||
return USBD_BUSY;
|
||||
|
||||
result = USBD_CDC_TransmitPacket(&hUsbDeviceFS, Buf, Len, endpoint_pair);
|
||||
/* USER CODE END 7 */
|
||||
return result;
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||
/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,801 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_conf.c
|
||||
* @version : v1.0_Cube
|
||||
* @brief : This file implements the board support package for the USB device library
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx.h"
|
||||
#include "stm32f4xx_hal.h"
|
||||
#include "usbd_def.h"
|
||||
#include "usbd_core.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
PCD_HandleTypeDef hpcd_USB_OTG_FS;
|
||||
void _Error_Handler(char * file, int line);
|
||||
|
||||
/* External functions --------------------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/* USER CODE BEGIN PFP */
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
|
||||
/* USER CODE END PFP */
|
||||
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/*******************************************************************************
|
||||
LL Driver Callbacks (PCD -> USB Device Library)
|
||||
*******************************************************************************/
|
||||
/* MSP Init */
|
||||
|
||||
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct;
|
||||
if(pcdHandle->Instance==USB_OTG_FS)
|
||||
{
|
||||
/* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
|
||||
|
||||
/* USER CODE END USB_OTG_FS_MspInit 0 */
|
||||
|
||||
/**USB_OTG_FS GPIO Configuration
|
||||
PA11 ------> USB_OTG_FS_DM
|
||||
PA12 ------> USB_OTG_FS_DP
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
||||
|
||||
/* Peripheral interrupt init */
|
||||
HAL_NVIC_SetPriority(OTG_FS_IRQn, 6, 0);
|
||||
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
|
||||
/* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
|
||||
|
||||
/* USER CODE END USB_OTG_FS_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
|
||||
{
|
||||
if(pcdHandle->Instance==USB_OTG_FS)
|
||||
{
|
||||
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END USB_OTG_FS_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
|
||||
|
||||
/**USB_OTG_FS GPIO Configuration
|
||||
PA11 ------> USB_OTG_FS_DM
|
||||
PA12 ------> USB_OTG_FS_DP
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
|
||||
|
||||
/* Peripheral interrupt Deinit*/
|
||||
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
|
||||
|
||||
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END USB_OTG_FS_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Setup stage callback
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_StatusTypeDef ret = USBD_OK;
|
||||
USBD_HandleTypeDef *pdev = hpcd->pData;
|
||||
USBD_SetupReqTypedef *req = &pdev->request;
|
||||
USBD_ParseSetupRequest(req, (uint8_t *)hpcd->Setup);
|
||||
if ( ( USB_REQ_TYPE_VENDOR == (req->bmRequest & USB_REQ_TYPE_MASK) ) && ( MS_VendorCode == req->bRequest ) )
|
||||
{
|
||||
pdev->ep0_state = USBD_EP0_SETUP;
|
||||
pdev->ep0_data_len = pdev->request.wLength;
|
||||
|
||||
ret = pdev->pClass->Setup(pdev, req);
|
||||
|
||||
if( (req->wLength == 0) && (ret == USBD_OK) )
|
||||
{
|
||||
USBD_CtlSendStatus(pdev);
|
||||
}
|
||||
return;
|
||||
}
|
||||
USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Data Out stage callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @param epnum: Endpoint number
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||
{
|
||||
USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Data In stage callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @param epnum: Endpoint number
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||
{
|
||||
USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SOF callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Reset callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
|
||||
|
||||
/* Set USB current speed. */
|
||||
switch (hpcd->Init.speed)
|
||||
{
|
||||
case PCD_SPEED_HIGH:
|
||||
speed = USBD_SPEED_HIGH;
|
||||
break;
|
||||
case PCD_SPEED_FULL:
|
||||
speed = USBD_SPEED_FULL;
|
||||
break;
|
||||
|
||||
default:
|
||||
speed = USBD_SPEED_FULL;
|
||||
break;
|
||||
}
|
||||
USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
|
||||
|
||||
/* Reset Device. */
|
||||
USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Suspend callback.
|
||||
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
/* Inform USB library that core enters in suspend Mode. */
|
||||
USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
|
||||
__HAL_PCD_GATE_PHYCLOCK(hpcd);
|
||||
/* Enter in STOP mode. */
|
||||
/* USER CODE BEGIN 2 */
|
||||
// TODO: do we really want this?
|
||||
if (hpcd->Init.low_power_enable)
|
||||
{
|
||||
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
|
||||
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
/* USER CODE END 2 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Resume callback.
|
||||
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
/* USER CODE BEGIN 3 */
|
||||
/* USER CODE END 3 */
|
||||
USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISOOUTIncomplete callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @param epnum: Endpoint number
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||
{
|
||||
USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISOINIncomplete callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @param epnum: Endpoint number
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
||||
{
|
||||
USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Connect callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Disconnect callback.
|
||||
* @param hpcd: PCD handle
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
|
||||
{
|
||||
USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
LL Driver Interface (USB Device Library --> PCD)
|
||||
*******************************************************************************/
|
||||
|
||||
/**
|
||||
* @brief Initializes the low level portion of the device driver.
|
||||
* @param pdev: Device handle
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
/* Init USB Ip. */
|
||||
if (pdev->id == DEVICE_FS) {
|
||||
/* Link the driver to the stack. */
|
||||
hpcd_USB_OTG_FS.pData = pdev;
|
||||
pdev->pData = &hpcd_USB_OTG_FS;
|
||||
|
||||
hpcd_USB_OTG_FS.Instance = USB_OTG_FS;
|
||||
hpcd_USB_OTG_FS.Init.dev_endpoints = 6;
|
||||
hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL;
|
||||
hpcd_USB_OTG_FS.Init.dma_enable = DISABLE;
|
||||
hpcd_USB_OTG_FS.Init.ep0_mps = DEP0CTL_MPS_64;
|
||||
hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
|
||||
hpcd_USB_OTG_FS.Init.Sof_enable = DISABLE;
|
||||
hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE;
|
||||
hpcd_USB_OTG_FS.Init.lpm_enable = DISABLE;
|
||||
hpcd_USB_OTG_FS.Init.vbus_sensing_enable = DISABLE;
|
||||
hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE;
|
||||
if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK)
|
||||
{
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
HAL_PCDEx_SetRxFiFo(&hpcd_USB_OTG_FS, 0x80);
|
||||
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 0, 0x40);
|
||||
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x40); // CDC IN endpoint
|
||||
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 3, 0x40); // ODrive IN endpoint
|
||||
}
|
||||
return USBD_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief De-Initializes the low level portion of the device driver.
|
||||
* @param pdev: Device handle
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_DeInit(pdev->pData);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Starts the low level portion of the device driver.
|
||||
* @param pdev: Device handle
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_Start(pdev->pData);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Stops the low level portion of the device driver.
|
||||
* @param pdev: Device handle
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_Stop(pdev->pData);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Opens an endpoint of the low level driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @param ep_type: Endpoint type
|
||||
* @param ep_mps: Endpoint max packet size
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Closes an endpoint of the low level driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Flushes an endpoint of the Low Level Driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Sets a Stall condition on an endpoint of the Low Level Driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Clears a Stall condition on an endpoint of the Low Level Driver.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns Stall condition.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @retval Stall (1: Yes, 0: No)
|
||||
*/
|
||||
uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
|
||||
|
||||
if((ep_addr & 0x80) == 0x80)
|
||||
{
|
||||
return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
|
||||
}
|
||||
else
|
||||
{
|
||||
return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Assigns a USB address to the device.
|
||||
* @param pdev: Device handle
|
||||
* @param dev_addr: Device address
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Transmits data over an endpoint.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @param pbuf: Pointer to data to be sent
|
||||
* @param size: Data size
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Prepares an endpoint for reception.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @param pbuf: Pointer to data to be received
|
||||
* @param size: Data size
|
||||
* @retval USBD status
|
||||
*/
|
||||
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size)
|
||||
{
|
||||
HAL_StatusTypeDef hal_status = HAL_OK;
|
||||
USBD_StatusTypeDef usb_status = USBD_OK;
|
||||
|
||||
hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
|
||||
|
||||
switch (hal_status) {
|
||||
case HAL_OK :
|
||||
usb_status = USBD_OK;
|
||||
break;
|
||||
case HAL_ERROR :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
case HAL_BUSY :
|
||||
usb_status = USBD_BUSY;
|
||||
break;
|
||||
case HAL_TIMEOUT :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
default :
|
||||
usb_status = USBD_FAIL;
|
||||
break;
|
||||
}
|
||||
return usb_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the last transfered packet size.
|
||||
* @param pdev: Device handle
|
||||
* @param ep_addr: Endpoint number
|
||||
* @retval Recived Data Size
|
||||
*/
|
||||
uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
||||
{
|
||||
return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
|
||||
}
|
||||
|
||||
#if (USBD_LPM_ENABLED == 1)
|
||||
/**
|
||||
* @brief Send LPM message to user layer
|
||||
* @param hpcd: PCD handle
|
||||
* @param msg: LPM message
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
|
||||
{
|
||||
switch (msg)
|
||||
{
|
||||
case PCD_LPM_L0_ACTIVE:
|
||||
if (hpcd->Init.low_power_enable)
|
||||
{
|
||||
SystemClock_Config();
|
||||
|
||||
/* Reset SLEEPDEEP bit of Cortex System Control Register. */
|
||||
SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
__HAL_PCD_UNGATE_PHYCLOCK(hpcd);
|
||||
USBD_LL_Resume(hpcd->pData);
|
||||
break;
|
||||
|
||||
case PCD_LPM_L1_ACTIVE:
|
||||
__HAL_PCD_GATE_PHYCLOCK(hpcd);
|
||||
USBD_LL_Suspend(hpcd->pData);
|
||||
|
||||
/* Enter in STOP mode. */
|
||||
if (hpcd->Init.low_power_enable)
|
||||
{
|
||||
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
|
||||
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
#endif /* (USBD_LPM_ENABLED == 1) */
|
||||
|
||||
/**
|
||||
* @brief Delays routine for the USB Device Library.
|
||||
* @param Delay: Delay in ms
|
||||
* @retval None
|
||||
*/
|
||||
void USBD_LL_Delay(uint32_t Delay)
|
||||
{
|
||||
HAL_Delay(Delay);
|
||||
}
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,445 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file : usbd_desc.c
|
||||
* @version : v1.0_Cube
|
||||
* @brief : This file implements the USB device descriptors.
|
||||
******************************************************************************
|
||||
* This notice applies to any and all portions of this file
|
||||
* that are not between comment pairs USER CODE BEGIN and
|
||||
* USER CODE END. Other portions of this file, whether
|
||||
* inserted by the user or by software development tools
|
||||
* are owned by their respective copyright owners.
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics International N.V.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "usbd_core.h"
|
||||
#include "usbd_desc.h"
|
||||
#include "usbd_conf.h"
|
||||
|
||||
/* USER CODE BEGIN INCLUDE */
|
||||
#include <MotorControl/odrive_main.h>
|
||||
/* USER CODE END INCLUDE */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* USER CODE END PV */
|
||||
|
||||
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup USBD_DESC
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_TypesDefinitions USBD_DESC_Private_TypesDefinitions
|
||||
* @brief Private types.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_TYPES */
|
||||
|
||||
/* USER CODE END PRIVATE_TYPES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Defines USBD_DESC_Private_Defines
|
||||
* @brief Private defines.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define USBD_VID 0x1209
|
||||
#define USBD_LANGID_STRING 1033
|
||||
#define USBD_MANUFACTURER_STRING "ODrive Robotics"
|
||||
#define USBD_PID_FS 0x0D32
|
||||
#define USBD_PRODUCT_XSTR(s) USBD_PRODUCT_STR(s)
|
||||
#define USBD_PRODUCT_STR(s) #s
|
||||
#define USBD_PRODUCT_STRING_FS ODrive HW_VERSION_MAJOR.HW_VERSION_MINOR CDC Interface
|
||||
#define NATIVE_STRING ODrive HW_VERSION_MAJOR.HW_VERSION_MINOR Native Interface
|
||||
#define USBD_CONFIGURATION_STRING_FS "CDC Config"
|
||||
#define USBD_INTERFACE_STRING_FS "CDC Interface"
|
||||
|
||||
#define USB_SIZ_BOS_DESC 0x0C
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_DEFINES */
|
||||
|
||||
/* USER CODE END PRIVATE_DEFINES */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
// MS OS String descriptor to tell Windows that it may query for other descriptors
|
||||
// It's a standard string descriptor.
|
||||
// Windows will only query for OS descriptors once!
|
||||
// Delete the information about already queried devices in registry by deleting:
|
||||
// HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\usbflags\VVVVPPPPRRRR
|
||||
__ALIGN_BEGIN uint8_t USBD_MS_OS_StringDescriptor[] __ALIGN_END =
|
||||
{
|
||||
0x12, // bLength 1 0x12 Length of the descriptor
|
||||
0x03, // bDescriptorType 1 0x03 Descriptor type
|
||||
// qwSignature 14 ‘MSFT100’ Signature field
|
||||
0x4D, 0x00, // 'M'
|
||||
0x53, 0x00, // 'S'
|
||||
0x46, 0x00, // 'F'
|
||||
0x54, 0x00, // 'T'
|
||||
0x31, 0x00, // '1'
|
||||
0x30, 0x00, // '0'
|
||||
0x30, 0x00, // '0'
|
||||
MS_VendorCode, // bMS_VendorCode 1 Vendor-specific Vendor code
|
||||
0x00 // bPad 1 0x00 Pad field
|
||||
};
|
||||
|
||||
// redefined further down
|
||||
__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
|
||||
/**
|
||||
* @brief UsrStrDescriptor
|
||||
* return non standard string descriptor
|
||||
* @param pdev: device instance
|
||||
* @param index : descriptor index (0xEE for MS OS String Descriptor)
|
||||
* @param length : pointer data length
|
||||
* @retval pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_UsrStrDescriptor(struct _USBD_HandleTypeDef *pdev, uint8_t index, uint16_t *length)
|
||||
{
|
||||
*length = 0;
|
||||
if (USBD_IDX_MICROSOFT_DESC_STR == index) {
|
||||
*length = sizeof (USBD_MS_OS_StringDescriptor);
|
||||
return USBD_MS_OS_StringDescriptor;
|
||||
} else if (USBD_IDX_ODRIVE_INTF_STR == index) {
|
||||
USBD_GetString((uint8_t *)USBD_PRODUCT_XSTR(NATIVE_STRING), USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Macros USBD_DESC_Private_Macros
|
||||
* @brief Private macros.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* USER CODE BEGIN PRIVATE_MACRO */
|
||||
|
||||
/* USER CODE END PRIVATE_MACRO */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_FunctionPrototypes USBD_DESC_Private_FunctionPrototypes
|
||||
* @brief Private functions declaration.
|
||||
* @{
|
||||
*/
|
||||
|
||||
uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||
uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||
uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||
uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||
uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||
uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||
uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||
|
||||
#ifdef USB_SUPPORT_USER_STRING_DESC
|
||||
uint8_t * USBD_FS_USRStringDesc(USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length);
|
||||
#endif /* USB_SUPPORT_USER_STRING_DESC */
|
||||
|
||||
#if (USBD_LPM_ENABLED == 1)
|
||||
uint8_t * USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
|
||||
#endif /* (USBD_LPM_ENABLED == 1) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
|
||||
* @brief Private variables.
|
||||
* @{
|
||||
*/
|
||||
|
||||
USBD_DescriptorsTypeDef FS_Desc =
|
||||
{
|
||||
USBD_FS_DeviceDescriptor
|
||||
, USBD_FS_LangIDStrDescriptor
|
||||
, USBD_FS_ManufacturerStrDescriptor
|
||||
, USBD_FS_ProductStrDescriptor
|
||||
, USBD_FS_SerialStrDescriptor
|
||||
, USBD_FS_ConfigStrDescriptor
|
||||
, USBD_FS_InterfaceStrDescriptor
|
||||
#if (USBD_LPM_ENABLED == 1)
|
||||
, USBD_FS_USR_BOSDescriptor
|
||||
#endif /* (USBD_LPM_ENABLED == 1) */
|
||||
};
|
||||
|
||||
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif /* defined ( __ICCARM__ ) */
|
||||
/** USB standard device descriptor. */
|
||||
__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END =
|
||||
{
|
||||
0x12, /*bLength */
|
||||
USB_DESC_TYPE_DEVICE, /*bDescriptorType*/
|
||||
#if (USBD_LPM_ENABLED == 1)
|
||||
0x01, /*bcdUSB */ /* changed to USB version 2.01
|
||||
in order to support LPM L1 suspend
|
||||
resume test of USBCV3.0*/
|
||||
#else
|
||||
0x00, /*bcdUSB */
|
||||
#endif /* (USBD_LPM_ENABLED == 1) */
|
||||
0x02,
|
||||
// Notify OS that this is a composite device
|
||||
0xEF, /*bDeviceClass*/
|
||||
0x02, /*bDeviceSubClass*/
|
||||
0x01, /*bDeviceProtocol*/
|
||||
USB_MAX_EP0_SIZE, /*bMaxPacketSize*/
|
||||
LOBYTE(USBD_VID), /*idVendor*/
|
||||
HIBYTE(USBD_VID), /*idVendor*/
|
||||
LOBYTE(USBD_PID_FS), /*idProduct*/
|
||||
HIBYTE(USBD_PID_FS), /*idProduct*/
|
||||
0x00, /*bcdDevice rel. 2.00*/
|
||||
0x03, /* bNumInterfaces */
|
||||
USBD_IDX_MFC_STR, /*Index of manufacturer string*/
|
||||
USBD_IDX_PRODUCT_STR, /*Index of product string*/
|
||||
USBD_IDX_SERIAL_STR, /*Index of serial number string*/
|
||||
USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/
|
||||
};
|
||||
|
||||
/* USB_DeviceDescriptor */
|
||||
/** BOS descriptor. */
|
||||
#if (USBD_LPM_ENABLED == 1)
|
||||
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif /* defined ( __ICCARM__ ) */
|
||||
__ALIGN_BEGIN uint8_t USBD_FS_BOSDesc[USB_SIZ_BOS_DESC] __ALIGN_END =
|
||||
{
|
||||
0x5,
|
||||
USB_DESC_TYPE_BOS,
|
||||
0xC,
|
||||
0x0,
|
||||
0x1, /* 1 device capability*/
|
||||
/* device capability*/
|
||||
0x7,
|
||||
USB_DEVICE_CAPABITY_TYPE,
|
||||
0x2,
|
||||
0x2, /* LPM capability bit set*/
|
||||
0x0,
|
||||
0x0,
|
||||
0x0
|
||||
};
|
||||
#endif /* (USBD_LPM_ENABLED == 1) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Variables USBD_DESC_Private_Variables
|
||||
* @brief Private variables.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif /* defined ( __ICCARM__ ) */
|
||||
|
||||
/** USB lang indentifier descriptor. */
|
||||
__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END =
|
||||
{
|
||||
USB_LEN_LANGID_STR_DESC,
|
||||
USB_DESC_TYPE_STRING,
|
||||
LOBYTE(USBD_LANGID_STRING),
|
||||
HIBYTE(USBD_LANGID_STRING)
|
||||
};
|
||||
|
||||
#if defined ( __ICCARM__ ) /* IAR Compiler */
|
||||
#pragma data_alignment=4
|
||||
#endif /* defined ( __ICCARM__ ) */
|
||||
/* Internal string descriptor. */
|
||||
__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup USBD_DESC_Private_Functions USBD_DESC_Private_Functions
|
||||
* @brief Private functions.
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Return the device descriptor
|
||||
* @param speed : Current device speed
|
||||
* @param length : Pointer to data length variable
|
||||
* @retval Pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_FS_DeviceDesc);
|
||||
return USBD_FS_DeviceDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the LangID string descriptor
|
||||
* @param speed : Current device speed
|
||||
* @param length : Pointer to data length variable
|
||||
* @retval Pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_LangIDDesc);
|
||||
return USBD_LangIDDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the product string descriptor
|
||||
* @param speed : Current device speed
|
||||
* @param length : Pointer to data length variable
|
||||
* @retval Pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||
{
|
||||
if(speed == 0)
|
||||
{
|
||||
USBD_GetString((uint8_t *)USBD_PRODUCT_XSTR(USBD_PRODUCT_STRING_FS), USBD_StrDesc, length);
|
||||
}
|
||||
else
|
||||
{
|
||||
USBD_GetString((uint8_t *)USBD_PRODUCT_XSTR(USBD_PRODUCT_STRING_FS), USBD_StrDesc, length);
|
||||
}
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the manufacturer string descriptor
|
||||
* @param speed : Current device speed
|
||||
* @param length : Pointer to data length variable
|
||||
* @retval Pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||
{
|
||||
USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the serial number string descriptor
|
||||
* @param speed : Current device speed
|
||||
* @param length : Pointer to data length variable
|
||||
* @retval Pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||
{
|
||||
USBD_GetString ((uint8_t *)serial_number_str, USBD_StrDesc, length);
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the configuration string descriptor
|
||||
* @param speed : Current device speed
|
||||
* @param length : Pointer to data length variable
|
||||
* @retval Pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||
{
|
||||
if(speed == USBD_SPEED_HIGH)
|
||||
{
|
||||
USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
|
||||
}
|
||||
else
|
||||
{
|
||||
USBD_GetString((uint8_t *)USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length);
|
||||
}
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Return the interface string descriptor
|
||||
* @param speed : Current device speed
|
||||
* @param length : Pointer to data length variable
|
||||
* @retval Pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||
{
|
||||
if(speed == 0)
|
||||
{
|
||||
USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
|
||||
}
|
||||
else
|
||||
{
|
||||
USBD_GetString((uint8_t *)USBD_INTERFACE_STRING_FS, USBD_StrDesc, length);
|
||||
}
|
||||
return USBD_StrDesc;
|
||||
}
|
||||
|
||||
#if (USBD_LPM_ENABLED == 1)
|
||||
/**
|
||||
* @brief Return the BOS descriptor
|
||||
* @param speed : Current device speed
|
||||
* @param length : Pointer to data length variable
|
||||
* @retval Pointer to descriptor buffer
|
||||
*/
|
||||
uint8_t * USBD_FS_USR_BOSDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
|
||||
{
|
||||
*length = sizeof(USBD_FS_BOSDesc);
|
||||
return (uint8_t*)USBD_FS_BOSDesc;
|
||||
}
|
||||
#endif /* (USBD_LPM_ENABLED == 1) */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user